MAN00000772_SI-G200BB_SVCPDFA.pdf - 第21页
WKGB-10102-01 G200BB Head Maintenance [Reassembling Procedure] Do not reus e the nozzle O-ring sprin g once it has been removed, otherwise the holding power may decrease. Nozzle holding power spec. : 800 [gf] or above Gu…
WKGB-10102-01
G200BB Head Maintenance
WKGB-10102-01
G200BB Head Maintenance
[Reassembling Procedure]
Do not reuse the nozzle O-ring spring once it has
been removed, otherwise the holding power may
decrease.
Nozzle holding power spec. : 800 [gf] or above
Guideline of nozzle holding force:
When the nozzle is pull down with
your finger, the inner shaft goes down
together with the nozzle.
Do not apply grease too much. Apply thinly to an
extent that color of AFC grease is not colored.
The O-ring is used as a brake. Use caution not to
contaminate the O-ring with oil, grease, and
others.
WKGB-10102-01
G200BB Head Maintenance
Do not touch the end plate (black part) on top of
the spline nut.
After attaching the bearing, rotate the spline
nut slowly to make sure that the spline nut
turns smoothly.