MAN00000772_SI-G200BB_SVCPDFA.pdf - 第335页
HLGB-10415-01 Nozzle Sensor A djustment [Coordinate value setup for sensor] Attach the jig nozz le so that the black dot on the bottom of the nozzle comes inward of the turret. Click in an ord er of MANUAL menu AXIS M …
HLGB-10415-01
Nozzle Sensor Adjustment
Click the Jog Move button.
Press the cursor key to move the head
to a position where working is easily
performed.
After moving the head, click the
Return button to close the XY Axis
screen.
Use a scale to measure detecting
surface height of the nozzle sensor
from upper face of the stand.
Loosen the installing bolts (2-CP2.5x8)
to adjust installing height of the nozzle
sensor so that the detecting surface
height becomes 203[mm].
After adjusting height, loosen the
installing bolts to fix the nozzle sensor.
HLGB-10415-01
Nozzle Sensor Adjustment
[Coordinate value setup for sensor]
Attach the jig nozzle so that the black dot on the
bottom of the nozzle comes inward of the turret.
Click in an order of MANUAL menu
AXIS MOTION tab RT button.
Operate the RT axis screen and move
the turret No.1 down to the H axis.
Click the Return button to close the
Turret RT Axis screen.
Check that angle of the RN axis is 0
on the axis operation screen.
HLGB-10415-01
Nozzle Sensor Adjustment
If the Teaching button does not become enabled,
click on the “Nozzle sensor coordinate” column
and then click the Teaching button again.
Operate the XY Teaching window to
align the light axis of the sensor and
the black dot on the bottom of the jig
nozzle.
Click the Set the nozzle tip button.
Click the Acq Pos. button.