MAN00000772_SI-G200BB_SVCPDFA.pdf - 第306页
HLGB-10406-01 FF/FR Axis Z-Phase Matching Rotate the pulley to shift the F a xis belt by one crest wi th the F axis belt freed from the pull ey . Specifiedtighteningtorq ue: 196cNm For pr ocedure of F axis belt tens…
HLGB-10406-01
FF/FR Axis Z-Phase Matching
Press the MODE/SET key on the
digital operator three times.
Press the ∧ key on the digital
operator three times.
Turn the F axis motor pulley by one or
more turns to adjust the indication
(Un003=) on the digital operator to “0”.
±
Put marking on the F axis belt and
pulley with white paint.
When marking, make sure that the pulley does
not rotate.
HLGB-10406-01
FF/FR Axis Z-Phase Matching
Rotate the pulley to shift the F axis
belt by one crest with the F axis belt
freed from the pulley.
Specifiedtighteningtorque:196cNm
For procedure of F axis belt tension adjustment, refer to the “FF/FR axis belt tension adjustment” on the
next page.
HLGB-10407-01
Adjustment of FF/FR Axis Belt
Tension
[Necessary jigs]
• Tension block Jig
• Tension meter
[Procedure]
Fix the tension block jig to the feed
part body with two screws (2-M3).
Tighten the tension adjustment screw
and temporarily fasten to the motor
bracket.