MAN00000772_SI-G200BB_SVCPDFA.pdf - 第236页
HLGB-10309-01 Calibration Data Edit When revising the parts fitting position without performing calibration, edit the calibration data according to the foll owing procedure. [Procedure] “1 to 8” on the left row are I nde…
HLGB-10308-01
Pickup Check Camera Calibration
In order to store the calibration result in the
unit, be sure to re-start the unit before
operating the unit.
Close the Calibration screen.
Press the power off switch.
Press the power on switch.
HLGB-10309-01
Calibration Data Edit
When revising the parts fitting position without performing calibration, edit the calibration data
according to the following procedure.
[Procedure]
“1 to 8” on the left row are Index No.
Input correction amount in X direction
into the middle row.
・
・
Input correction amount in Y direction
into the right row.
・
・
1,0.000,0.000
2,0.000,0.000
3,0.000,0.000
4,0.000,0.000
5,0.000,0.000
6,0.000,0.000
7,0.000,0.000
8,0.000,0.000
HLGB-10309-01
Calibration Data Edit
“1 to 8” on the left row are Index No.
Input correction amount in X direction
into the second row from the left.
・
・
－
Input correction amount in Y direction
in the third row from the left.
・
＋
・
－
Input angle correction value into the
rightmost row.
・
・
1,0.000,0.000,0.000
2,0.000,0.000,0.000
3,0.000,0.000,0.000
4,0.000,0.000,0.000
5,0.000,0.000,0.000
6,0.000,0.000,0.000
7,0.000,0.000,0.000
8,0.000,0.000,0.000