MAN00000772_SI-G200BB_SVCPDFA.pdf - 第230页
HLGB-10307-01 Nozzle Changer T eaching
HLGB-10307-01
Nozzle Changer Teaching
Move the head manually so that the
jig nozzle of turret No.1 comes above
A-1 of the nozzle changer.
Lower the inner shaft with your finger
and make sure the jig nozzle can be
inserted into the nozzle cartridge A-1
smoothly.
Position the X, Y, and RN axes accurately.
While keeping the H-axis in the
lowered position with your finger, turn
the Servo ON.
Click the Acq. Pos. button.
Make sure the 2 button is pressed,
and then turn the Servo OFF.
Capture A-8 replacing position
coordinate by the same procedure as
the procedure 12.
Make sure the 3 button is pressed,
and then turn the Servo OFF.
Capture C-8 replacing position
coordinate by the same procedure as
the procedure 12.
HLGB-10307-01
Nozzle Changer Teaching
HLGB-10308-01
Pickup Check Camera Calibration
Perform this working on both heads on the front side and rear side.
[Necessary jigs]
Calibration data FD
Calibration plate jig
Jig positioning pin
Pickup check resolution inspection jig B
Length reference nozzle jig
[Procedure]
Click the Pickup Camera Calibration
button on the CALIBRATION screen.