MAN00000772_SI-G200BB_SVCPDFA.pdf - 第195页
HLGB-10207-01 RN A xis Origin Offset Setup T urn on the servo for the RN axis at a position where the RN axis is rotated counterclockwise and stops. T ake note of angle of the RN a xis displayed on the RN/H Axis screen. …
HLGB-10207-01
RN Axis Origin Offset Setup
Click the R.H button on the ORG
OFFSET screen.
Click the OFF button for the RN axis
servo.
Turn on the servo for the RN axis at a
position where the RN axis is rotated
clockwise and stops.
Take note of angle of the RN axis
displayed on the RN/H Axis screen.
(Example: 369.7˚)
Click the OFF button for the RN axis
servo on the RN/H Axis screen.
HLGB-10207-01
RN Axis Origin Offset Setup
Turn on the servo for the RN axis at a
position where the RN axis is rotated
counterclockwise and stops.
Take note of angle of the RN axis
displayed on the RN/H Axis screen.
(Example: -149.5˚)
Calculate the offset value of the RN axis.
Click the Change Offset button on the
ORG OFFSET screen.
HLGB-10207-01
RN Axis Origin Offset Setup
Input the value (example: 110.1)
obtained in the previous procedure
into the RN Offset box, and click the
Set button.