MAN00000772_SI-G200BB_SVCPDFA.pdf - 第304页
HLGB-10406-01 FF/FR Axis Z-Phase Matching Loosen the two fixing screws for the motor bracket. Push the motor brack e t to the b ack, then the F axis belt i s freed. Loosen the six screws to raise the servo unit cover . D…
HLGB-10406-01
FF/FR Axis Z-Phase Matching
[Necessary jigs]
• Digital operator
[Procedure]
Loosen the four screws to remove the F
axis cover.
HLGB-10406-01
FF/FR Axis Z-Phase Matching
Loosen the two fixing screws for the
motor bracket.
Push the motor bracket to the back,
then the F axis belt is freed.
Loosen the six screws to raise the
servo unit cover.
Disconnect the FAN cable connected to
the servo unit cover.
Remove the servo unit cover.
HLGB-10406-01
FF/FR Axis Z-Phase Matching
Press the MODE/SET key on the
digital operator three times.
Press the ∧ key on the digital
operator three times.
Turn the F axis motor pulley by one or
more turns to adjust the indication
(Un003=) on the digital operator to “0”.
±
Put marking on the F axis belt and
pulley with white paint.
When marking, make sure that the pulley does
not rotate.