MAN00000772_SI-G200BB_SVCPDFA.pdf - 第285页
HLGB-10316-01 Measuring Parallelism of Reference Pin and Dependent Pin In a state th a t the depen dent pin is on the center of the “PCBOARD DISPLA Y” screen, check th e coordinate value o f Y axi s on the a xi s operati…
HLGB-10316-01
Measuring Parallelism of Reference
Pin and Dependent Pin
Click the XY button.
Click the Rel. Move button in the
move mode.
Click the X axis and put checkmark.
Input “-100” into X axis box.
Press the [START] button on the
operation panel.
Click the Jog Move button in the move
mode.
Press the cursor key to move XY axes
so that the dependent pin is displayed
on the center of the “PCBOARD
DISPLAY” screen.
Click the Return button to close XY
axes screen.
HLGB-10316-01
Measuring Parallelism of Reference
Pin and Dependent Pin
In a state that the dependent pin is on
the center of the “PCBOARD
DISPLAY” screen, check the
coordinate value of Y axis on the axis
operation screen, and record the value.
Click in an order of VISION tab
Check button.
Click in an order of PWB
TRANSPORT tab Locator Pin Down
button.
HLGB-10317-01
Parts Discard Position Adjustment
Perform this working on both heads on the front side and rear side.
[Procedure]
Click in an order of M/C SETUP menu
MOTION SETUP tab Head Pos.
tab.
Input the following values into the
setting space of the Parts Discard Box
Position.
X Y
FrontsidePC -60.0 160.0
RearsidePC 60.0 -180.0
Click the Set button.