MAN00000772_SI-G200BB_SVCPDFA.pdf - 第307页
HLGB-10407-01 Adjustment of FF/FR A xis Belt T ensio n [Necessary jigs] • T ension block Jig • T ension meter [Procedure] Fix the tension block jig to the feed part body with two screws (2-M3). T ighten the tension adjus…
HLGB-10406-01
FF/FR Axis Z-Phase Matching
Rotate the pulley to shift the F axis
belt by one crest with the F axis belt
freed from the pulley.
Specifiedtighteningtorque:196cNm
For procedure of F axis belt tension adjustment, refer to the “FF/FR axis belt tension adjustment” on the
next page.
HLGB-10407-01
Adjustment of FF/FR Axis Belt
Tension
[Necessary jigs]
• Tension block Jig
• Tension meter
[Procedure]
Fix the tension block jig to the feed
part body with two screws (2-M3).
Tighten the tension adjustment screw
and temporarily fasten to the motor
bracket.
HLGB-10407-01
Adjustment of FF/FR Axis Belt
Tension
For the detailed operating method of the
tension meter, refer to the manual attached to
the tension meter.
Set the measuring terminal of tension
meter near the belt on the middle
between both pulleys.
When the belt is pulled by finger,
tension value of the belt is displayed
on the tension meter.
Standard:70 85N