MAN00000772_SI-G200BB_SVCPDFA.pdf - 第176页
HLGB-10203-01 Acquiring Mounting Stro ke Setu p Perform this working on b o th he ads on t he front side and rear side. [Necessary jigs] Calibration plate jig Jig positio ni ng p in Length refer ence noz z l e jig Thickn…
HLGB-10202-01
H Axis Origin Position Setup
HLGB-10203-01
Acquiring Mounting Stroke Setup
Perform this working on both heads on the front side and rear side.
[Necessary jigs]
Calibration plate jig
Jig positioning pin
Length reference nozzle jig
Thickness gauge (t=0.03 mm)
[Procedure]
HLGB-10203-01
Acquiring Mounting Stroke Setup
When installing the nozzle, insert it while
slowly turning.
After inserting the nozzle, check that it is not
drawn out by pulling downward.
Click in an order of M/C SETUP
menu M/C MAINTENANCE tab
Calibration button.
Click the Machine Setup button on the
CALIBRATION screen.
Click the Acquiring mounting stroke
button on the Machine Setup screen.