MAN00000772_SI-G200BB_SVCPDFA.pdf - 第175页

HLGB-10202-01 H A xis Origin Position Setup

HLGB-10202-01

H Axis Origin Position Setup

Click the Setup Start button on the H

Axis Home screen.

Press the [START] button on the

operation panel.

Lower the H axis roller by hand and

gradually return it to the top end.

After returning the H axis, push up the inner

shaft from lower section by finger and check

that the inner shaft has returned to the

uppermost end.

Press the [START] button on the

operation panel.

Repeat working of the procedure 2.-4.

up to the turret No.8.

HLGB-10202-01

H Axis Origin Position Setup

HLGB-10203-01

Acquiring Mounting Stroke Setup

Perform this working on both heads on the front side and rear side.

[Necessary jigs]

Calibration plate jig

Jig positioning pin

Length reference nozzle jig

Thickness gauge (t=0.03 mm)

[Procedure]

