MAN00000772_SI-G200BB_SVCPDFA.pdf - 第319页

HLGB-10412-01 Nozzle Height Adjustment Click in an ord er of MANUAL menu  AXIS M OTION tab  XY button. Click the Jog Move button. Press the cursor key to jog-move the reference j ig nozzle to vicin ity of center of the…

100%1 / 712
HLGB-10412-01
Nozzle Height Adjustment
Perform this working on both heads on the front side and rear side.
[Necessary jigs]
Calibration plate jig
Jig positioning pin
Length reference nozzle jig
Nozzle height adjusting block
23.1mm
22.9mm
[Procedure]
HLGB-10412-01
Nozzle Height Adjustment
Click in an order of MANUAL menu
AXIS MOTION tab XY button.
Click the Jog Move button.
Press the cursor key to jog-move the
reference jig nozzle to vicinity of center
of the calibration plate.
Click the Return button to close XY
axes screen.
If the Shift key on the keyboard is pressed,
Fast/Slow for Jog Move can be switched.
Place a head height adjusting block
under the reference jig nozzle.
Check that lower face of the head
height adjusting block is inserted
between the calibration plate and
reference jig nozzle.
Check that higher face of the head
height adjusting block is not inserted
between the calibration plate and
reference jig nozzle.
HLGB-10412-01
Nozzle Height Adjustment
Slightly loosen the bolts fixing the B
head housing.
Insert a height adjusting spacer into
the gap above the B head housing.
Tighten the bolts on the B head
housing, and check clearance between
the calibration plate and reference jig
again.