IPC-7095C-2013.pdf - 第29页

In order to address the need to mount a ceramic package on an organic printed board and accommodate the dif ferences in their respective CTEs, a column of solder provides the attachment termination. The Ceramic Column Gr…

fatigue damage caused by a CTE mismatch between the

silicon die and interposer.

Solder joint fatigue at the assembly level is mitigated when

CTE mismatch is minimized and stand-off height is

increased. The reliability of the solder attachment can be

optimized by developing a thorough understanding of the

product’s operational use environment and by following

the guidance outline in the design for reliability (DfR) pro-

cedure suggested in IPC-D-279. Risk of tin whiskers and

gold embrittlement should be considered when selecting

surface ﬁnishes. Thick gold (more than 0.25 µm) as a sur-

face ﬁnish should be avoided to mitigate the risk of gold

embrittlement of the solder. Excessive thickness of other

noble metals as a surface ﬁnish should also be avoided.

3.5.11 Drivers for Lead-Free Technology There are two

drivers for corporations to convert their products from

those containing the ubiquitous tin/lead solder to a lead-

free solder. One is a legislative driver and the other is a

marketing driver.

The current legislative driver for eliminating lead in elec-

tronics and electrical equipment is the Restrictions on Haz-

ardous Substances (RoHS) Directive (2002/95SEC). The

RoHS Directive limits the percentage of lead, mercury,

cadmium, hexavalent chromium and two brominated ﬂame

retardants that can be present in electrical and electronic

equipment that enters the market in the European Union

(EU). Currently there is no legislation in either the United

States or Japan that restricts the use of lead in electronic

products. There are requirements in Japan to recycle a lim-

ited number of used electronic equipment including PCs,

CRTs, TVs and White Goods. There is also an EU Direc-

tive on Waste in Electrical and Electronic Equipment

(WEEE). It requires that the waste be managed and

recycled according to the Directive which took effect in

2005.

The other driver is a marketing driver. Corporations are

developing and introducing lead-free products as a market-

ing initiative. Essentially, they do not want to be upstaged

by competitors who could introduce lead-free or halogen

free products before them. The BGA components, as well

as the entire electronic assembly must meet all of the leg-

islative and marketing criterion. Producers of electronic

products are required to provide declarations as to the

materials or substances contained in the products, thus this

requirement is moved down to the supply chain.

4 COMPONENT CONSIDERATIONS

4.1 Semiconductor Packaging Comparisons and Driv-

ers

There are many types of package formats for ICs but

only four types of terminal shapes: in-line pin (both single

and dual); pin grid array; J lead; and gull-wing lead. The

most common lead conﬁgurations for surface mountable

plastic packaged ICs are the J-lead and gull-wing lead. Of

these two, the gull-wing lead form is the most commonly

used lead type for plastic packaged ICs. One of the biggest

problems with higher pin count, ﬁne-pitch gull wing leads

is their fragility, and consequently, susceptibility to lead

damage such as coplanarity, lead bending and sweep. Lead

damage is one of the leading causes of defects in ﬁne-pitch,

gull wing leaded packages. Although gull wing devices are

the most commonly used lead form for low and high pin

count packages, ball grid array packaged devices have

achieved broad acceptance due to their physical robustness,

(pin-for-pin) size reduction and enhanced electrical perfor-

mance. In regard to performance, the BGA signal paths can

be much shorter than those of ﬁne-pitch gull wing lead

packages, advantageous in high-speed applications. BGA

packaged ICs have exhibited very high board level assem-

bly process yields due to their ability to self-align during

reﬂow soldering. Because the array format can accommo-

date high I/O within a small form factor, BGAs have

proven to be a practical solution to the higher pin count

packaging trend as well.

4.1.1 Package Feature Comparisons The designs and

conﬁgurations of terminations for array area components

have evolved signiﬁcantly in recent years from the simple

ball being attached to a land on the package substrate. The

Ball Grid Array (BGA) conﬁguration is the most basic, and

still the most widely used termination design for area array

packages. A solder ball is reﬂow soldered onto the land of

a package substrate using either ﬂux or solder paste. This

package, with balls on its underside, can then be subse-

quently reﬂow soldered onto boards using the standard

SMT soldering process. The solder balls melt fully and

collapse when forming the solder joint.

The Solder Grid Array (SGA) termination design dispenses

with the solder ball and just prints solder paste on the

package land. The resulting solder bump is then reﬂow sol-

dered onto boards to form the solder joint using the stan-

dard SMT soldering process. The drive for thinner product

designs has increased the use of SGA terminations in

recent years.

Making the interposer out of ceramic material is also a

technique used for producing grid array packages. The

Ceramic Ball Grid Array (CBGA) termination design is

similar to the BGA design but the ball used in this concept

does not melt fully and collapses during the board attach-

ment process. The composition of the ball is typically

90%Pb-10%Sn (High Pb). Due to the wide mismatch in

expansion between the ceramic substrate and the epoxy-

based board laminate, a high stand-off height needs to be

maintained for the solder joint to provide adequate reliabil-

ity. The noncollapsing high Pb solder ball provides this

requirement. The high lead ball has been replaced by a

lead-free alloy that also does not collapse.

IPC-7095C January 2013

Provided by IHS under license with IPC

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

In order to address the need to mount a ceramic package on

an organic printed board and accommodate the differences

in their respective CTEs, a column of solder provides the

attachment termination. The Ceramic Column Grid Array

(CCGA) termination design is an extension of the ceramic

ball grid array (CBGA) package. The CCGA uses a

90%Pb-10%Sn cast column instead of a high melt ball to

create a higher standoff and more ﬂexible interconnection.

This achieves a signiﬁcant increase in reliability. This high

lead alloy has also been supplanted by a lead-free alloy for

those applications that prohibit the use of lead as a sub-

stance in the ﬁnal electronic product.

The SMT Solder Charge™ (SMT SC) termination design

was developed by a socket supplier to improve the solder

joint yield and reliability of area array socket terminations

when assembled on a printed board. This termination is a

stamped metallic pin which has the soldering element cut

from strip made from lead-free or tin/lead alloys. The sol-

der element itself extends beyond the end of the terminal.

As the solder melts, the solderable device as a whole is

lowered towards the PCB engaging solder points that were

previously more distant. Also, the malleable tip of the sol-

der element deforms when pushed into the PCB, again

compensating for coplanarity errors. Likewise, the protru-

sion on the end of the terminal can push through solder

paste to help compensate for coplanarity errors. When

reﬂowed, the SMT SC solder engulfs the stamped terminal

and adheres to the PCB’s solder land to form a bugle

shaped ﬁllet. The exact shape of this ﬁllet is controlled by

the size/shape of both the solder land and the wettable sur-

faces of the SMT SC terminal. These wettable surfaces of

the terminal are deﬁned (i.e., limited) by a laser-ablated

zone which stops unwanted wetting, and so keeps the mol-

ten solder from ‘‘running up the terminal.’’

The Pillar (PILR™) termination is designed for very ﬁne

pitch, chip-scale level packages and entails a small solid

copper contact feature in the package land. This design

enables a ﬁner contact pitch array conﬁguration, which in

turn provides a greater potential for increasing I/O density

and improved circuit routing efficiency. Furthermore, the

µPILR termination overcomes many of the existing limita-

tions of the spherical terminations. These include very

close contact spacing (<0.3 mm is possible), dramatically

lower package proﬁle, enhanced electrical and thermal per-

formance, and ruggedness, exhibiting excellent physical

shock (drop) and vibration reliability results. Figure 4-1

shows the various area array termination designs that are

available today.

4.1.2 BGA Package Drivers The emphasis on faster,

smaller and lighter electronics systems is making compo-

nent, board, and system packaging more complex. The

increase in assembly complexity is due in part to the wide

use of small outline surface mountable packages, the key to

miniaturization of electronics products. The device contact

pitch plays a critical role in the complexity of manufactur-

ing processes as well. For example, with the adoption of

ﬁner and ﬁner contact pitches, greater precision is

demanded for each process in the assembly sequence: pick-

and-place, solder paste printing, and solder reﬂow. Inspec-

tion, rework and repair need to become more precise as

well.

Key issues to be addressed when selecting BGA compo-

nent packaging are thermal and electrical performance, real

estate constraint and cost. The component packaging

requirement varies for different types of systems. For

example, the high-end microprocessors run at higher fre-

quencies and require thermally and electrically enhanced

packages. Examples of thermal enhancements are heat

slugs, heat spreaders, heat sink and ﬁn-fan (fan mounted on

heat sink), etc. Examples of electrical enhancements are

multilayer and higher pin-count packages and in-package

capacitance. Hermetic ceramic packages are generally used

for the in-package capacitance application. For mid-range

systems, performance is important as well, but so is cost

(not that cost is not important for high end systems).

4.1.3 Cost Issues Lead-frame packaged ICs have tradi-

tionally maintained a relatively low manufacturing cost.

This is due to the very high volume of products being

offered in a limited package conﬁguration. This allows the

manufacturer to utilize common tooling and molding pro-

cesses for a diverse number of customer applications. The

array package format, on the other hand, is more often

designed and engineered for a speciﬁc product application.

The initial cost for packaging BGA devices with a pin

count of less than 200 will most likely be greater than

lead-frame packaging. This is due in part to the unique

single application substrate design and additional package

assembly process steps. Cost parity between lead frame

packaged ICs and the BGA package is generally reached

when the device requires 200 or more I/Os.

4.1.4 Component Handling BGAs can be furnished in a

carrier tray format or tape-and-reel. The EIA standard

embossed tape-and-reel format is often speciﬁed when the

IC components are relatively small and/or required for very

high-volume applications. The JEDEC registered carrier

trays are furnished to meet industry developed design

guidelines (see JEDEC publication 95, Section 4.9 and

Section 4.10) with a ﬁxed length, width, and thickness. The

plastic packaged ICs, including the BGA, are susceptible to

moisture retention that can damage the package during

reﬂow solder processing. To protect the devices from

undue physical contact and exposure to humidity, the

loaded carrier trays are shipped in a sealed ESD and

vacuum purged moisture resistant envelope (and should

remain sealed until ready for board level assembly (see

4.8.5).

January 2013 IPC-7095C

Provided by IHS under license with IPC

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---

Termination Cross-Section Before

Reﬂow Soldering on Board

Termination Cross-Section After

Reﬂow Soldering on Board Package Name

Solder Ball

Land

Solder

Mask

Package Substrate

Solder Joint

Board

Land

Solder

Mask

Package

Ball Grid Array (BGA)

Solder Bump

Package Substrate

Land

Solder

Mask

Solder Joint

Package

Land

Solder

Mask

Board

Solder Grid Array (SGA)

Package Substrate

High PB

Solder Ball

Fillet

Solder

Mask

Land

Solder Joint

Fillet

Package Substrate

Board

Land

Solder

Mask

Ceramic BGA (CBGA)

Socket Terminal

Solder Joint

Board

Socket Body

Land

Board

Fillet

Column

Ceramic Package

Ceramic Column Grid Array (CCGA)

Socket

Terminal

Stamped

Solder

Preform

Socket Body

Land

Fillet

Column

Ceramic Package Substrate

Solder Charge™ SMT

µPLR

Solder Mas

Package Substrate

Land

µPLR

Solder Mas

Package Substrate

Board

PILR™

Figure 4-1 Termination Types for Area Array Packages

IPC-7095C January 2013

Provided by IHS under license with IPC

Not for Resale

No reproduction or networking permitted without license from IHS

--`,,```,,,,````-`-`,,`,,`,`,,`---