TR7500E_Manual_en_v28.pdf - 第104页
C h a p t e r 2 M a nu a l B a r i n t r o d u ce T R 7500 U S E R M A N U AL 97 S t e p 3. A d d t h e o t h e r c o mp o n e n t d a t a a n d s a v e t h e f i l e . 4.7.6. A dd C ompon e n t i n Pr e. l T h i s i s t…
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
96
Step10. Press [Close] to close the Non-Cad dialog.
4.7.5. Edit an existing AOI File
Step1. Press [CAD File/Load] to open a file.
Step2. Use [By Component] to set origin.
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
97
Step3. Add the other component data and save the file.
4.7.6. Add Component in Pre.
l This is to add a new component to an existing project with non-cad function.
l Procedure
Step1. Press [Program/Non CAD/Add Component in Pre.] and enter the dialog as the
1. Use box tool to set
the component
3. Select [By
Component] then
press [CAD(0,0)]
2. Select the component
in the table
Chapter 2 Manual Bar introduce
TR7500 USER MANUAL
98
following.
Step2. Move selecting tools to the objective component center and the component has
to be on board 1.
Step3. Input data at [Name&Type Setting] field
Step4. Check [Apply] and select an angle.
Step5. Press [CAD Data/Add] to create the component data.
Step6. Add the other components on board 1.
Step7. Press [Close] to exit.
Step8. Press [Program/Train] or [ ] to enter the train dialog.
Step9. Use [Merge] button to merge the component library. See Chapter 4 6.8. for
more information about “Merge”.
Step10. Press [Utilities/Capture FOV Images] to get the FOV images again.
4.8. BOM Check
Step3
Step4
Step5
Step7
Step2