TR7500E_Manual_en_v28.pdf - 第265页

C h a p t e r 4 T r a i n d i a l og f u n c t i on T R 7500 U S E R M A N U AL 2 58 l P a n e l / S e t – [ P a n e l ] m ea n s t o r e v i e w a l l t h e F O V s i n t h e w h o l e P CB ; [ S e t ] m ea n s t o r e …

100%1 / 292
Chapter 4 Train dialog function
TR7500 USER MANUAL
257
l Input the angle and press [Rotate] to rotate the multi-function window.
6.6.5. 2X
l Show the double size of FOV image. The display area is the multi-function
location and the image is reviewed for test.
6.6.6. Load
l You can load a saved FOV image for review or test, but the image isn’t saved in
the project.
6.6.7. INSPECT
l Inspect current FOV and display the result.
6.7. Switch FOV
Chapter 4 Train dialog function
TR7500 USER MANUAL
258
l Panel/Set – [Panel] means to review all the FOVs in the whole PCB; [Set] means
to review set FOVs for multi-board.
l Top Camera – [ON] means to review the FOVs and the FOVs display as red
boxes; [OFF] means not to review and the red boxes are disappeared.
6.8. Merge
l You can press the button to merge the specific library to component. After
merging you should capture FOV images again. (Chapter 2 7.3. ).
l Merge Steps
Step1. Press [Merge] and there is a library window appeared. The detailed
functions are in Chapter 3 10.1.2. . You should select a library and press
[OK].
Step2. Input the object component type or name then press [OK].
l Type – Select the objective type. The check box means merge the
library to all components with the type.
l Component – If you want to merge the library to a single
component you should not select the check box and choose a
component.
l Over Write – Select to over write the data or it just merge the
component don’t have inspection boxes.
Step3. Capture FOV images again.
6.9. Histogram
l The curve displays the distribution of gray level in multi-function window. The
horizontal axis means the gray level; the vertical axis means the pixel counts; the
red line means the gray level where the mouse cursor is on.
Chapter 4 Train dialog function
TR7500 USER MANUAL
259
6.10. Change Lighting
6.10.1. Move to FOV Position
l Selecting the check box means move the camera to the position of FOV that we
review now. You can change and save the lighting.
l Not selecting the check box means capture the image at current position. You can
change the lighting for test, but not save it.
6.10.2. Set Lighting
l You can set the lighting for the FOV