TR7500E_Manual_en_v28.pdf - 第273页
C h a p t e r 5 I n s p ec t i on d i a l o g f u n c t i on T R 7500 U S E R M A N U AL 2 66 C h a p t e r 5 I n s p e c t i o n d i a l o g f u n c t i on 1 . Im age d i ag r a m fu nc ti on l A l t e r n a t i v e – A…
Chapter 4 Train dialog function
TR7500 USER MANUAL
265
6.15. Weighting
l When checking [Mono] or [RGB], the image in Multi-Function Window displays
according to the setting. This is using for user's reference.
l Select [Mono]
l Select [Red] and [Green]
Chapter 5 Inspection dialog function
TR7500 USER MANUAL
266
Chapter 5 Inspection dialog function
1. Image diagram function
l Alternative – Add an alternative to component.
l Edit COMP. – Edit component name and angle.
l SetRange – Set search range for a inspection box
l Setting – Set the pass level
l Delete box – Delete selected box
l +Box – Add one box to selected component.
l Test/UnTest – Set selected box as test or untest
l Train/UnTrain – Train inspection or set trained box as untrained.
l View model – Review the standard images
l Setwarp/Delwarp – Set or delete [Warp].
l 2X – Show the double size of FOV image. The display area is the multi-function
location and the image is reviewed for test.
l Save – Save the image to the folder.
l Lighting – Change the lighting to inspect.
l Insp. – Inspect the current FOV.
l Visible – Selecting this is to display the inspection boxes.
l Mono/R/G/B – Let the image in Multi-Function Window displays according to
the setting.
l Prev/Next – Go to the next or previous failed FOV.
Chapter 5 Inspection dialog function
TR7500 USER MANUAL
267
1.1. Panel Defect Map
l It will show the twice panel image while clicking on the image.
l It will show the defect position and list the component name and defect kind at
right side. If you select [Auto Confirm Mode] the size of the map will be double.
l You could key in “map” and press [Enter] to open the defect map again if it has
been closed.
1.2. Result Dialog