FLEXLINE-CAD_INM.pdf - 第108页
A- 11 6.2.2 Definin g the field Next, each of these fiel ds must be correlated s o that Flexline CAD can recognize it. Click the cell of a fiel d and select the field from the displayed list. In this example, the fields …
A-10
6.2 Field definition screen
Next, specify the field position and perform definition.
6.2.1 Specifying the field position
At the position where each field is separated, enter a vertical line to divide fields.
Figure A-13 Field definition screen (placement)
In the "Field" text box, a new created field is displayed.
In this example, there are seven fields as shown below:
Check whether the column numbers are correct or not.
Data
Start column
End column
!TAG
1
4
5
8
+XXXXXX
9
15
+YYYYYY
16
22
+AAA
23
26
+S
27
29
CCCCCCCCCCCCCCC
30
45
For entering a vertical line, click once on the screen
(on the column to be separated). If the vertical line is
wrongly entered, click on the vertical line once again
to delete it.
A-11
6.2.2 Defining the field
Next, each of these fields must be correlated so that Flexline CAD can recognize it. Click the
cell of a field and select the field from the displayed list.
In this example, the fields are as shown below:
Field
Start column
End column
Tag
1
4
(Does not need to be defined)
5
8
Placement position X
9
15
Placement position Y
16
22
Placement angle
23
26
Placement side
27
29
Placement ID
30
45
Figure A-14 Placement data fields
6.3 Field Translation screen (definition of placement side)
In the placement data of CAD data, the placement side is distinguished between T" and "B."
Now, define the "T" as the top side and "B" as the bottom side.
Figure A-15 Field Translation screen
Click the "Next" button.
①
Click here.
②
Click the cell of
"Production
program
keyword" and
select "Top
side."
③
Enter the "T" in the cell of "CAD data
keyword." Likewise, for the lower
column, select "Bottom side" in
②
and enter the "B."
A-12
7. Component Section
Next, the screen to define component data is displayed.
In the placement data of "Tutorial.txt", there is no "Component name."
However, "Tutorial.txt" correlates the placement ID and the component name in the component
data. The component name (component name linked with the placement ID) is converted by
this setting.
* Though there are component names exceeding 20 characters, transformation is performed
without editing.
7.1 Section definition screen
Move the "scroll bar" provided on the right side of "File display" downward by clicking. Then, the
component data screen is displayed.
● Section layout
From the list of "Section Layout", select the "Section" and enter "Component" in "Start
Keyword" and "Date" in "End Keyword."
* Enter them in the keywords by distinguishing between upper-case characters and
lower-case characters.
● Field layout
From the list of "Field Layout," select the "Delimited", and from the list of Delimiter," select ",."
Figure A-16 Section Definition screen (Component)
Click the "Next" button.