FLEXLINE-CAD_INM.pdf - 第95页

90 T able 10 - 4 Placement fi elds Ta g V alid Invalid Placement side Placement ID * Link ID (BOM) Placement position X Placement position Y Placement angle Component name * Placement/dispensing IC mark type IC mark ID I…

100%1 / 145
89
10.3 Field
The field names that can be used to define a field by the user-defined wizard are as shown
below. The fields shown in bold letters require data conversion setting on the field
conversion screen of the user-defined wizard.
Table 10-3 PWB fields
Tag
Valid
Invalid
Transport direction
Reference side
PWB ID *
Positioning method
PWB configuration
Bad mark type
BOC type
Mark recognition
PWB outer dimensions X
PWB outer dimensions Y
Positioning hole position X
Positioning hole position Y
PWB layout offset X
PWB layout offset Y
Circuit outer dimensions X
Circuit outer dimensions Y
Circuit layout offset X
Circuit layout offset Y
First circuit position X
First circuit position Y
Number of circuit divisions X
Number of circuit divisions Y
Pitch between circuits X
Pitch between circuits Y
Multi-circuit non-matrix circuit
layout position X
Multi-circuit non-matrix circuit
layout position Y
Multi-circuit non-
matrix circuit layout
angle
BOC mark position No.1 X
BOC mark position No.1 Y
BOC mark No.1 dimensions
BOC mark No.1 Name
BOC mark position No.2 X
BOC mark position No.2 Y
BOC mark No.2 dimensions
BOC mark No.2 Name
BOC mark position No.3 X
BOC mark position No.3 Y
BOC mark No.3 dimensions
BOC mark No.3 Name
BOC mark position (Bottom side)
No.1 X *1
BOC mark position (Bottom side)
No.1 Y *1
BOC mark (Bottom side) No.1
dimensions *1
BOC mark (Bottom side) No.1
Name *1
BOC mark position (Bottom side)
No.2 X *1
BOC mark position (Bottom side)
No.2 Y *1
BOC mark (Bottom side) No.2
dimensions *1
BOC mark (Bottom side) No.2
Name *1
BOC mark position (Bottom side)
No.3 X *1
BOC mark position (Bottom side)
No.3 Y *1
BOC mark (Bottom side) No.3
dimensions *1
BOC mark (Bottom side) No.3
Name *1
Bad mark position X
Bad mark position Y
PWB height
PWB thickness
The second BOC mark position
No.1 X *2
The second BOC mark position
No.1 Y *2
The second BOC mark No.1
dimensions *2
The second BOC mark No.1 Name
*2
The second BOC mark position
No.2 X *2
The second BOC mark position
No.2 Y *2
The second BOC mark No.2
dimensions *2
The second BOC mark No.2 Name
*2
The second BOC mark position
No.3 X *2
The second BOC mark position
No.3 Y *2
The second BOC mark No.3
dimensions *2
The second BOC mark No.3 Name
*2
The second BOC mark position
(Bottom side) No.1 X *2
The second BOC mark position
(Bottom side) No.1 Y *2
The second BOC mark (Bottom
side) No.1 dimensions *2
The second BOC mark (Bottom
side) No.1 Name *2
The second BOC mark position
(Bottom side) No.2 X *2
The second BOC mark position
(Bottom side) No.2 Y *2
The second BOC mark (Bottom
side) No.2 dimensions *2
The second BOC mark (Bottom
side) No.2 Name *2
The second BOC mark position
(Bottom side) No.3 X *2
The second BOC mark position
(Bottom side) No.3 Y *2
The second BOC mark (Bottom
side) No.3 dimensions *2
The second BOC mark (Bottom
side) No.3 Name *2
*1 Enabled with the Version 6.00 or later only. (Some functions may be enabled with the latest version
only.)
90
Table 10-4 Placement fields
Tag
Valid
Invalid
Placement side
Placement ID*
Link ID (BOM)
Placement position X
Placement position Y
Placement angle
Component name *
Placement/dispensing
IC mark type
IC mark ID
IC mark link
IC mark 1 X
IC mark 1 Y
IC mark 2 X
IC mark 2 Y
IC mark 3 X
IC mark 3 Y
Skip
Test run
Layer
Placement machine
Placement head
Dispensing skip
Dispensing test run
Dispensing machine
Dispensing head
91
Table 10-5 Component fields
Tag
Valid
Invalid
Reference designator (BOM)
Component name *
Comment
Outer dimension, horizontal
Outer dimension, vertical
Outer dimension, height
* To give compatibility with other JUKI products (mounter, production support system etc.),
Flexline CAD restricts the lengths of these fields. In this case, the PWB ID and component
name fields become blank after conversion, and "######" is entered in the placement ID field
after conversion.
The fields and production program keywords requiring field conversion by the user-defined wizard
are as follows.
Table 10-6 Fields requiring field conversion
Section
Field
Production program keyword
PWB
Valid
Valid
Invalid
Invalid
Transport direction
Left to right
Right to left
Reference side Top
Bottom
Positioning method
Positioning hole reference
Shape reference
PWB configuration
Single-circuit
Multi-circuit matrix
Multi-circuit non-matrix
Bad mark type Do not use
Sensor light
Mark is dark
BOC type Do not use
PWB marks are used
Circuit marks are used
Mark recognition
Gray scale
Binary scale
Placement
Valid
Valid
Invalid
Invalid
Placement side Top side
Bottom side
Placement/dispensing
Placement only
Dispensing only
Placement/dispensing
IC mark type IC marks are used
IC marks are not used
Skip Skip
No skip
Test run
Test run
No test run