FLEXLINE-CAD_INM.pdf - 第32页

27 Chapter 5 Batch Conv ersion and Sectional Conv ersion *1 The conversion mode can be selected by s electing the "Batch conver sion" tab or "Sect ional conversion" t ab of the main screen. Figure 5 -…

(2) Edit menu

Figure 4.3.1-3 "Edit" menu

(3) Convert menu

Figure 4.3.1-4 "Convert" menu

(4) Format menu

Figure 4.3.1-5 "Format" menu

(5) Tool menu

Figure 4.3.1-6 "Tool" menu

(6) Help menu

Figure 4.3.1-7 "Help" menu

4.3.2 Flexline CAD's Tool Bar

Figure 4.3.2-1 Tool bar of Flexline CAD

(View input file): Displays the input file by the application related to the file extension.

(View conversion log): Displays the conversion log by the application related to the file extension.

(Add input file): Adds the input file to the file table.

(Start conversion): Starts conversion for the selected file table.

Add: Adds the input file to the file table.

Delete: Deletes the input file on the line selected

in the file table from the file table.

Select All: Selects all the line of the table.

Start Conversion: Starts conversion for the

selected file table.

Creates an input format newly, and edits,

adds, and deletes an input format.

Chapter 5 Batch Conversion and Sectional Conversion *1

The conversion mode can be selected by selecting the "Batch conversion" tab or "Sectional

conversion" tab of the main screen.

Figure 5-1 Selection of conversion mode

The column width of the file table can be freely adjusted. Put the mouse cursor to the boundary

on the right side of each column header. When the cursor shape is changed into left and right

two lines of the arrow, drag the boundary. Thus, the column width can be narrowed or

extended.

*1 The screen displayed with the Version 5.10 or earlier is different from that with the Version

6.00 or later.

5.1 Batch conversion mode

Select the "Batch conversion" tab on the main screen. At this time, one or multiple CAD data

can be converted simultaneously. For example, if four input files are added to the batch

conversion file table and conversion is started, all the input files are converted sequentially from

the top. During conversion, the selected line of the conversion file table is shifted to indicate the

file being processed.

Figure 5.1-1 Batch conversion file table

Regarding "Input file" or "Output file", double-click the cell or select the cell and then press the

"Enter" key. Then, the following dialog box is displayed to change the file.

Figure 5.1-2 "Open file" dialog box

Figure 5.1-3 Setting change from the list

In the batch conversion mode, multiple files are converted collectively (individual setting can be

performed) according to its literal sense.

For example, conversion is performed as follows:

File A → Converted into File X

File B → Converted into File Y

File C → Converted into File Z

5.2 Sectional conversion mode

Select the "Sectional conversion" tab on the main screen. When PWB data, placement data,

and component data are distributed to multiple files, it is possible to create a single output file

through combination of each data.

It is also possible to convert only a part of PWB data, placement data, and component data from

one CAD data.

• Screen example where one file is selected:

Figure 5.2-1 Sectional conversion file table (for one file)

• Changing only a part from a single file:

In this example, placement and component data are converted but PWB data is not

converted.

Figure 5.2-2 Sectional conversion table

(only placement data and component data are selected)

Regarding "Input format", "Output format", and

"Placement side", click the cell to display a list and

then change values.