FLEXLINE-CAD_INM.pdf - 第96页
91 T able 10 - 5 Component f ields Ta g V alid Invalid Reference designator (BO M) Component name * Comment Outer dimension, horizont al Outer dimension, vertical Outer dimension, height * T o give compatibility with ot …
90
Table 10-4 Placement fields
Tag
Valid
Invalid
Placement side
Placement ID*
Link ID (BOM)
Placement position X
Placement position Y
Placement angle
Component name *
Placement/dispensing
IC mark type
IC mark ID
IC mark link
IC mark 1 X
IC mark 1 Y
IC mark 2 X
IC mark 2 Y
IC mark 3 X
IC mark 3 Y
Skip
Test run
Layer
Placement machine
Placement head
Dispensing skip
Dispensing test run
Dispensing machine
Dispensing head
91
Table 10-5 Component fields
Tag
Valid
Invalid
Reference designator (BOM)
Component name *
Comment
Outer dimension, horizontal
Outer dimension, vertical
Outer dimension, height
* To give compatibility with other JUKI products (mounter, production support system etc.),
Flexline CAD restricts the lengths of these fields. In this case, the PWB ID and component
name fields become blank after conversion, and "######" is entered in the placement ID field
after conversion.
The fields and production program keywords requiring field conversion by the user-defined wizard
are as follows.
Table 10-6 Fields requiring field conversion
Section
Field
Production program keyword
PWB
Valid
Valid
Invalid
Invalid
Transport direction
Left to right
Right to left
Reference side Top
Bottom
Positioning method
Positioning hole reference
Shape reference
PWB configuration
Single-circuit
Multi-circuit matrix
Multi-circuit non-matrix
Bad mark type Do not use
Sensor light
Mark is dark
BOC type Do not use
PWB marks are used
Circuit marks are used
Mark recognition
Gray scale
Binary scale
Placement
Valid
Valid
Invalid
Invalid
Placement side Top side
Bottom side
Placement/dispensing
Placement only
Dispensing only
Placement/dispensing
IC mark type IC marks are used
IC marks are not used
Skip Skip
No skip
Test run
Test run
No test run
92
Layer Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Layer 6
Layer 7
Layer 8
Layer 9
Layer 10
Placement machine Auto selection
Machine 1
Machine 2
Machine 3
Machine 4
Machine 5
Machine 6
Machine 7
Machine 8
Machine 9
Machine 10
Placement head
Default head
Left head
Middle head
Right head
Dispensing skip Skip
No skip
Dispensing test run Dispensing by test run
No dispensing by test run
Dispensing machine
Auto selection
Machine 1
Machine 2
Machine 3
Machine 4
Machine 5
Machine 6
Machine 7
Machine 8
Machine 9
Machine 10
Dispensing head
Default head
Left head
Middle head
Right head
Component
Valid
Valid
Invalid
Invalid