FLEXLINE-CAD_INM.pdf - 第82页

77 Chapter 9 Env ironment S etup Set the defaults of Flexline CAD, set the output file format and conver sion, and set display items. Display the Set env ironments screen by selecting the "T ools" - "Set E…

8.4.2 Sorting component data

Figure 8.4.2-1 Sorting placement data

8.5 Finishing the data modification dialog box

From each screen of General, PWB data, component data, or placement data, click one of the

"Apply", "Do not apply", and "Cancel" buttons.

When the "Apply" button is clicked, the modified contents are incorporated and transformation is

performed continuously.

When the "Do not apply" button is clicked, the modified contents are not incorporated and

transformation is performed continuously.

Figure 8.5-1 Data modification dialog box finishing buttons

Click the column header to start sorting.

*To make a display in the original order,

use the "No." column for sorting.

Searching component data: For

searching, perform the same operations

as those for "8.2.5.2 Searching the

circuit layout."

Chapter 9 Environment Setup

Set the defaults of Flexline CAD, set the output file format and conversion, and set display

items. Display the Set environments screen by selecting the "Tools" - "Set Environments"

command.

When you select the "Conversion/Options" from the menu bar, this screen appears.

Figure 9-1 "Tool" - "Set environments" menu

9.1 Set Environments screen *1

9.1.1 Default Format/Folder setting screen

Figure 9.1.1-1 "Set Environments" - "Default Setup"

*1 The screen displayed with the Version 5.10 or earlier is different from that with the Version

6.00 or later.

 Default Format

Specify the initial values for the input format and output format. In the input format, the format

created by user-defined wizard is displayed. For the input format and output format, refer to

"10.1 Standard format."

Figure 9.1.1-2 Default format

 Default Folder

For the input folder, set the initial folder for referring to the input file. For the output folder, set the

initial folder for creating an output folder.

Figure 9.1.1-3 Default Folder

The " Browse For Folder" dialog box is displayed by pressing the " Browse" button provided by

the side of the text box. Then, select a folder and click the "OK" button. The path of the selected

folder is displayed in the text box. It is also possible to enter the path directly into each text box.

9.1.2 Output file format setting screen after conversion

Figure 9.1.2-1 "Set Environments" - "Output File Format"

When "Save in an 8.3 format file name" is checked off, the output file name is saved in the 8.3

format. In this case, the characters added as top identifier characters and bottom identifier

characters are not omitted but only the original file name is omitted.

(Example)

Input file name: SampleData.txt

Output folder: C\FlexlineCAD\Prg

Output format: IS,IS Lite

The number of characters that can

be entered is up to 7 characters. *

The same character string cannot

be entered.

What is the 8.3 format?

In this format, the file name is represented

by 8 characters (bytes) and the extension

is represented by 3 characters (bytes).