FLEXLINE-CAD_INM.pdf - 第135页

C- 15 There will always be thr ee comment lines at the beginning of the PLAC EMENT data section. The first and third line will be dashed lines. The sect ion schema li ne is located betw een the two dashed lines and lists…

100%1 / 145
C-14
♦
"FUJI"
PCB Data
FUJI PCB Data Sample
( PCB_data
*-------------------------
( attr value )
*-------------------------
( PCB_x 32893 )
( PCB_y 29403 )
( Pin_pitch 0 )
( PCB_thickness 160 )
( XA_global_ofst 0 )
( YA_global_ofst 0 )
( XB 0 )
( YB 0 )
( Xi_trial_area 0 )
( Yi_trial_area 0 )
( Xj_trial_area 0 )
( Yj_trial_area 0 )
( Mark_area_tolerance 0 )
( Mark_pitch_tolerance 0 )
( Softlanding_speed 0 )
( Softlanding_acc_time 0 )
)
The PCB data section in FUJI data file starts with the line which is labeled as “( PCB_data” and
ends up with the first closing “)” located in column 1.
Table Fuji-1: FUJI Data Format PCB section
Data Item
Lines
Sections
Fields
Units
Scaling
PCB
Dimension X
Line tagged with string
“PCB_x” in second field
“SECTION_0” Third mm 1/100
PCB
Dimension Y
Line tagged with string
“PCB_y” in second field
“SECTION_1” Third mm 1/100
Placement Data
FUJI Placement Data Sample
( Sequence_data
*----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
( Sequence_# Block_# Working_mode Device_# X Y Q Main_mark_# Sub_mark_# Head_# Gluing_time
Sequence_comment Sequence_skip Device_skip Block_skip End_mark Holder_# Carrying_mode Id_code MN
Pallet_# Reflow_pass Terminate_seq Reflow_temp Reflow_time Cleaning_seq U U2 )
*----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
( 1 0 "F" 1 -1458 10895 0 0 0 1 0 "MARK" "" "" "" "" 0 0 0 1 0 0 0 0 0 0 0 "" )
( 2 0 "F" 1 -19690 255 0 0 0 1 0 "MARK" "" "" "" "" 0 0 0 2 0 0 0 0 0 0 0 "" )
( 3 1 "D" 123 -30274 5385 5400 1 2 0 0 "C107" "" "" "" "" 0 0 0 0 0 0 0 0 0 0 0 "" )
( 524 1 "D" 75 -24184 23041 0 1 2 0 0 "I4L" "" "" "" "" 0 0 0 0 0 0 0 0 0 0 0 "" )
……………
)
The PLACEMENT data section in FUJI data file starts with the line which is labeled as
“( Sequence_data” and ends up with the first closing “)” located in column 1.
C-15
There will always be three comment lines at the beginning of the PLACEMENT data section. The
first and third line will be dashed lines. The section schema line is located between the two
dashed lines and lists all the names of the data fields in the PLACEMENT data section . All data
fields and their order will both be determined by the schema line.
In Placement Data section, both BOC mark information and Placement data are defined.
Placement data are defined in the line with “Working_mode” = “D” or “DD.”
BOC mark information are defined in the line with “Working_mode” = “F” or “FD.”
Table Fuji-2: Fuji Data Format PLA section
Data Item
Lines
Field
Units
Scaling
BOC mark
position 1X
The first line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line which
lists all the data fields’
names. The keyword for this
field is “X”.
mm 1/100
BOC mark
position 1Y
The first line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line which
lists all the data fields’
names. The keyword for this
field is “Y”.
mm 1/100
BOC mark
position 2X
The second line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “X”.
mm
1/100
BOC mark
position 2Y
The second line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Y”.
mm
1/100
BOC mark
position 3X
The third line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “X”.
mm
1/100
BOC mark
position 3Y
The third line tagged with
string “F” or “FD” of the
“Working_mode” data field inside
the placement data section
except the three comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Y”.
mm
1/100
Placement
ID
Line tagged with string “D”or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is
“Ysequqnce_comment”.
N/A
N/A
Placement
Position X
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “X”.
mm
1/100
Placement
Position Y
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Y”.
mm 1/100N/A
Placement
Angle
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Q”.
Degree 0.016666
667
C-16
Placement
BOM
Link ID
(new 2.0)
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Device_#”.
N/A N/A
Placement
BlockID
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The keyword for this
field is “Block_#”.
N/A N/A
Placement
Skip
**
Line tagged with string “D” or
“DD” of the “Working_mode” data
field inside the placement data
section except the three
comment lines
Based on the order of the
section schema line, which
lists all the data fields’
names. The value of this
field will be determined by
three fields. The keywords
for these fields are:
“Sequence_skip”, ”
Device_skip”, “Block_ship”.
N/A N/A
** Placement Skip will be regarded to “Skip” when the ““Sequence_skip” = “S” or ”Device_skip” =
“D,” or “Block_ship” = “B,” Otherwise means “Don’t Skip.”
Component Data
FUJI Component Data Sample
( Device_data
*----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------
( Device_# Next_device Feeder Feeding_times Pickup_offset_x Pickup_offset_y Pickup_offset_q
Pickup_offset_z Part_data_name Device_comment Device_constant Quantity Nozzle_size_CP5
TPU_magazine_no Original_device TPU_unit_no )
*----------------------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------
( 1 0 1 1 0 0 0 0 "RECT1608080" "CKC05F1H103ZXT" "" 118 0 0 0 0 0 )
( 2 0 1 1 0 0 0 0 "RECT1912070" "CKC10F1H104ZXT" "" 33 0 0 0 0 0 )
……………
)
The COMPONENT data section in FUJI data file starts with the line which is labeled as
“( Device_data” and ends up with the first closing “)” located on column 1.
There will always be three comment lines in the beginning of the COMPONENT data section.
The first and third line will be dash line. The section schema line is just between the two dash
lines and it lists all the names of the data fields in the COMPONENT section.
Table Fuji-3: Fuji Component section
Data Item
Lines
Field
Units
Scaling
Reference
Designator
Line inside the
component data
section except the
three comment lines
Based on the order of the
section schema line which lists all
the data fields’ names. The keyword
for this field is “Device_#”.
N/A N/A
Component
Name
Line inside the
component data
section except the
three comment lines
Based on the order of the
section schema line which lists all
the data fields’ names. The keyword
for this field is “Device_comment”
N/A N/A
Component
Comment
Line inside the
component data
section except the
three comment lines
Based on the order of the
section schema line which lists all
the data fields’ names. The keyword
for this field is “Device_constant”.
N/A N/A