FLEXLINE-CAD_INM.pdf - 第110页
A- 13 7.2 Field definition scre en Next, specify the actual field position and define a fi eld. 7.2.1 S pecify ing the number of f ields Enter "2" as the number of fields in the "Field" text box and p…
A-12
7. Component Section
Next, the screen to define component data is displayed.
In the placement data of "Tutorial.txt", there is no "Component name."
However, "Tutorial.txt" correlates the placement ID and the component name in the component
data. The component name (component name linked with the placement ID) is converted by
this setting.
* Though there are component names exceeding 20 characters, transformation is performed
without editing.
7.1 Section definition screen
Move the "scroll bar" provided on the right side of "File display" downward by clicking. Then, the
component data screen is displayed.
● Section layout
From the list of "Section Layout", select the "Section" and enter "Component" in "Start
Keyword" and "Date" in "End Keyword."
* Enter them in the keywords by distinguishing between upper-case characters and
lower-case characters.
● Field layout
From the list of "Field Layout," select the "Delimited", and from the list of Delimiter," select ",."
Figure A-16 Section Definition screen (Component)
Click the "Next" button.
A-13
7.2 Field definition screen
Next, specify the actual field position and define a field.
7.2.1 Specifying the number of fields
Enter "2" as the number of fields in the "Field" text box and press the Enter key.
Figure A-17 Field Definition screen (Component)
7.2.2 Defining a field
Next, define a field. Click the cell of a field, and select the field from the displayed list.
Field
Reference designator (BOM)
Component name
Figure A-18 Component data field
Click here to display a list and select a field
from the list displayed by pulling down.
A-14
7.3 Field Translation screen
Figure A-19 Filed Translation screen (component)
* Leave "BOM range character" and "BOM delimiter" blank.
* "BOM" is a command to link "Reference designator (BOM)" with "Placement ID." (For
details, refer to 7.6.2.)
Click the "Next" button.
8. Finish screen
The following screen is displayed.
Click the "Finish" button to complete the definition.
Figure A-20 Finish screen for new creation
With this, a new user-defined format has been created for Tutorial.txt.
The created format is saved in the "{Flexline CAD install folder}\Formats" folder as a format file.
Place a check mark to "Enable BOM link."