FLEXLINE-CAD_INM.pdf - 第7页
2 Chapter 1 Introduction The JUKI Flexline CAD softw are is hereinafter called Flexline CAD. 1.1 Organ ization of the M anual The Flexline CAD Operat ions Manual is comprised of the following two part s: Part 1: Basic …
1
PART 1 BASIC PART
Part 1 describes an overview, installing procedure, screen structure, etc. of Flexline CAD.
Chapter 1 Introduction
Chapter 2 Outline of Operations
Chapter 3 Install
Chapter 4 Trying to Start Flexline CAD
Chapter 5 Batch Conversion and
Sectional Conversion
2
Chapter 1 Introduction
The JUKI Flexline CAD software is hereinafter called Flexline CAD.
1.1 Organization of the Manual
The Flexline CAD Operations Manual is comprised of the following two parts:
Part 1: Basic Part Describes an overview, installing procedure, screen
structure, etc. of Flexline CAD.
Part 2: Operation Part Describes each command in detail.
Part 1
Chapter 1 Introduction
Describes the features, product overview, etc. of Flexline CAD.
Chapter 2 Outline of Operations
Describes the flowcharts of data conversion operations in Flexline CAD and necessary
settings for using Flexline CAD.
Chapter 3 Install
Describes the procedures for installing and uninstalling the hardware devices required to
execute Flexline CAD properly.
Chapter 4 Trying to Start Flexline CAD
Describes the procedures for starting and exiting Flexline CAD, and the screen structures.
Chapter 5 Batch Conversion and Sectional Conversion
Describes batch conversion and sectional conversion.
Part 2
Chapter 6 Trying to perform conversion
Describes the basic conversion procedures.
Chapter 7 User-Defined Wizard
Describes the methods for creating and changing an input format.
Chapter 8 Data modification dialog box
Describes the method for changing data at conversion.
Chapter 9 Environment Setup
Describes the method for setting the initial values and display items of Flexline CAD.
Chapter 10
Flexline CAD setting table
Describes the format types, data file extensions, and fields of Flexline CAD.
Appendix A ...... Practice Creating an Input File by Using the Attached File "Tutorial.txt"
Appendix B ...... Transformation
Appendix C ...... Default Format
Appendix D ...... Glossary and Troubleshooting
3
Before using this manual, the user must be well versed in operating our mounter (KE series),
and also have a good understanding of basic operations of Windows. This manual is
described on the assumption that the user should have understood how to operate Windows
and how to use menus or dialog box boxes. For operating these, refer to the Windows
manuals.
The user may use this manual together with the on-line help of Flexline CAD.
The displayed screens and some functions of Flexline CAD Version 5.10 or earlier are
different from those of Version 6.00 or later. See the following notes:
*1 The screens displayed with Flexline CAD Version 5.10 or earlier are different from those of
the Version 6.00 or later.
*2 Enabled with Flexline CAD Version 6.00 or later only. (Some functions may be enabled
with the latest version only.)
*3 Enabled with Flexline CAD Version 5.10 or earlier.