YST15_Users_E.pdf - 第142页
1-4 1 Overview 1.3 T ools and grease n T ools Item Note Precision flat-head screwdriver Used to check cable connection Hex wrench set 2mm, 3mm, 4mm, and 5mm wrenches are used Wrench 13mm Used to adjust Y -axis carrier wh…
1-3
1
Overview
Period Equipment Part
Maintenance
item
Page Work detail
1 year Handler
Forward/
Backward-axis
Guide
Chapter 3
"4.1"
Use cleaning wiper with IPA (or absolute alcohol) to clean
the guide. Apply the specified grease (AFB grease) on the
guide by hands.
Drive pulley
Chapter 3
"4.2"
Check if the setscrew fixing the motor and the drive pulley is
tighten securely.
Belt
Chapter 3
"4.3"
Push the belt softly to check if the belt moves 8 to 10 mm. If
it moves more or less than that, adjust the belt tension.
Open/Close-axis
Ball screw,
guide
Chapter 3
"4.4"
Use cleaning wiper with IPA (or absolute alcohol) to clean
the ball screw and the guide. Apply the specified grease (AFB
grease) on the guide by hands.
Ball screw
Chapter 3
"4.5"
Check if the setscrew fixing the motor and the ball screw is
tighten securely.
Rotation (Delta)
-axis
Gear
Chapter 3
"4.6"
Use cleaning wiper with IPA (or absolute alcohol) to clean
the gear. Apply the specified grease (AFB grease) on the
guide by hands.
Drive gear
Chapter 3
"4.7"
Check if the setscrew fixing the motor and the drive gear is
tighten securely.
Reel sensor Reel sensor
Chapter 3
"4.8"
Use dry soft cloth to clean three reel sensors. Don't use
alcohol.
Control board Cables
Chapter 3
"4.9"
Check if cables on the handler control board are connected
properly.
1-4
1
Overview
1.3 Tools and grease
n
Tools
Item Note
Precision flat-head screwdriver Used to check cable connection
Hex wrench set 2mm, 3mm, 4mm, and 5mm wrenches are used
Wrench 13mm Used to adjust Y-axis carrier wheels. Box wrench is recommended
Precision wrench set 7mm and 10mm are used
Vernier caliper Used to check X-axis level
Vacuum cleaner Used to clean inside machines
Step ladder This might be required to check inside the machine.
n
Grease
Item Part name Part number Note
AFB grease GREASE, AFB LG0-M86A4-00X 70g contained
AFB grease
53101-KMS-00
n
NOTE
AFB grease is used for three axes of the handler, Forward/Backward-axis, Open/Close-axis, and Rotation-axis. Do not
apply it on X-axis and Y-axis.
TIP
Apply grease by hands for this machine. Do not use grease guns.
1-5
1
Overview
n
Alcohol for cleaning
Item Note
Alcohol for cleaning Prepare IPA or absolute alcohol
n
Cleaning paper and soft cloth
Item Note
Cleaning wiper Do not make dust with it
Soft cloth Used to clean sensors
Cotton swabs Used to clean inside machine
n
Protective equipment
Item Note
Protective glove Used when working in machine
Protective glass Used when cleaning axes with alcohol
Protective glove of chemical
proof
Used when cleaning axes with alcohol and greasing