YST15_Users_E.pdf - 第62页
2-34 2 Operation n NOTE The dedicated case is required to store tray components in YST15. Contact the sales distributer . TIP YST15 can not store stick components. n Format T he packaging types of tape components are cla…
2-33
2
Operation
Packaging registration screen
[Save] button
Mandatory contents
24235-KMS-00
Content Description Mandatory
*Code A packaging code to be managed in YST15. It is automatically given. YES
*
Partnumber Input the unique code of the packaging. some cases
Manufacturer
Input the manufacturer of the packaging.
Manufactures can be selected in pull-down list.
If the desired manufacturer isn't in pull-down, press "+" to add new one.
some cases
Quantity Input the remaining quantity of the packaging. Yes
Waste
Input the quantity of the items which are not used for product but are wasted,
such as the items which are disposed when a reel is set on a feeder.
-
Datecode
Input the manufacture date of the packaging.
For example, "1829" means 29th week of 2018.
It is possible to directly input the date, to press [Calendar] button to select the
date, or to press [Today] button to input today.
some cases
Lot number
The lot number of the packaging.
If the item is set on "Mandatory lot number", this must be input.
some cases
Item code
The item codes, which are registered in "ITEM" screen, including in the
packagings.
Yes
Packaging type
Select Reel or Tray depending on the packaging type.
Stick components can not be stored in YST15.
Yes
Customer
Input the customer information of the product using the packaging.
Customers can be selected in pull-down list. If the desired customer isn't in
pull-down, press "+" to add new one.
-
Supplier Input the supplier of the packagings. -
Delivery node Input the delivery note for the customer. -
Purchase order Input the purchase order by the customer. -
Prodction Line
Select the production line which is going to use the packaging in pull-down
list.
-
Format
Select the packaging size in pull-down list.
See "
n
Format" below for details.
some cases
Manufacturing
If the production which uses the packaging is a sub contractor, select
"Subcontract" in pull-down list.
If it is a prime contractor, select "Full contract".
some cases
Expiration(months) Input the expiration period of the packaging. -
Packaging number
This is used for the multiple packagings which have the same part number
and the same lot.
If there are three same reels, input "3" here to register three packagings with
consecutive number.
-
*
It is automatically given in [Add].
2-34
2
Operation
n
NOTE
The dedicated case is required to store tray components in YST15.
Contact the sales distributer.
TIP
YST15 can not store stick components.
n
Format
The packaging types of tape components are classified as the following table depending on its tape width and reel size.
Check actual packagings to select correct setting.
Format Tape width Reel size
H08S
8mm
7 inch
H08W 13-15 inch
H12S
12mm
7 inch
H12W 13-15 inch
H16S
16mm
7 inch
H16W 13-15 inch
H24S
24mm
7 inch
H24W 13-15 inch
H32W 32mm 13-15 inch
H44W 44mm 13-15 inch
H52W 52mm 13-15 inch
c
CAUTION
If the setting is wrong, the machine may fail to store the packaging or Handler may interfere with the packaging.
TIP
It is possible only to register packagings of "H44W", but it is optional.
"H52W" can be stored only in the special ordered.
4
Press [Save] button.
Press [Save] button, then the bar code label is printed from the label printer.
Bar code label printer
23212-KMS-00
2-35
2
Operation
TIP
Sometime the following message appears such as when the label is printed first time after machine is started.
In that case, wait a seconds and press [OK], then the label is printed.
Message screen
24236-KMS-00
5
Paste the label on the packaging.
A bar code label requires to be close to outer circumference of the reel like the following figure.
If the label is too close to the center, the inner bar code reader of YST15 may fail to recognize the
packaging.
Where to paste a bar code label on a packaging
Label position
23213-KMS-00
n
NOTE
Do not paste the label printed here on a label existing on the packaging.
6
Check the registered contents.
Check the contents in "ADD APPROVAL" screen.
Check the packaging information, and press [Save] button, then registering the packaging completes.
"ADD APPROVAL" screen
[Save] button
24237-KMS-00