YST15_Users_E.pdf - 第6页
ii Safety instructions 1. Label positions The following warning/caution labels are attached to the Y AMAHA products to ensure safe and correct use. Check that the information on each label is clearly legible and comply w…
i
Safety instructions
CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC
Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
Cautions regarding the official language of EU countries and the language used in operation
manuals, CE declarations, operation screen characters, and warning labels when this equipment is
installed in an EU country.
• All materials except warning labels are written in English only.
n
NOTE
Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese
language.
A2.
EMC description
• Electromagnetic immunity (Immunity)
Complies with test standards as specified by EN 61000-6-2.
• Electromagnetic emissions (Emission)
Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.
n
NOTE
Class A equipment is intended for use in industrial environments. If used in other environments, ensuring
electromagnetic compatibility (EMC) might be difficult. Refer to EN 55011 standards for detailed information.
ii
Safety instructions
1. Label positions
The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
For safety precautions other than those on the labels shown in this section, see the instructions in "2.Safety".
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
n
NOTE
When connecting power to this equipment, refer to "Power connection terminals" described in the appendix of the
maintenance manual or user's manual.
Warning/caution labels
■
Main control panel
■ Loading/Unloading area.
■ Loading/Unloading area.
93011-KMS-10
iii
Safety instructions
Potential
hazard
Electrical shock hazard
To avoid
hazard
Do not touch while power is supplied.
Applicable
machines
YST15 main control panel
Case
Maintenance
Potential
hazard
Electrical shock hazard
To avoid
hazard
Do not open this panel before turning off the power.
Applicable
machines
YST15 main control panel
Case
Maintenance
Potential
hazard
Hands or fingers might be pinched or crushed by front door, causing injury.
To avoid
hazard
Never place hands or fingers when closing the door.
Applicable
machines
YST15 front door inner side
Case
Setup
(Loading/Un-
loading)