YST15_Users_E.pdf - 第155页

3-5 3 Y early maintenance items 1.3 Check the cables in the main control panel 1 T urn the machine off. 2 Detach the co ver of the main control panel. Use a hex wrench (3mm) to remove four bolts fixing the cover . 3 Chec…

100%1 / 182
3-4
3
Yearly maintenance items
1.2 Cleaning reel detection sensors in loading/unloading area
1
Turn the machine off.
2
Clean the reel detection sensors
Open a side door and enter the machine.
Use dry soft cloth to clean two reel detec-
tion sensors at top of loading/unloading
area.
3
Clean reflectors.
Use dry soft cloth to clean two reflectors at
bottom of loading/unloading area.
c
CAUTION
Do not use alcohol for cleaning sensors and reflectors.
Using alcohol may damage sensors and reflectors.
Step 2,3
Reel detection sensors and reflectors
Two reflectors
To be cleaned
Two reel detection sensors
53304-KMS-00
3-5
3
Yearly maintenance items
1.3 Check the cables in the main control panel
1
Turn the machine off.
2
Detach the cover of the main
control panel.
Use a hex wrench (3mm) to remove four
bolts fixing the cover.
3
Check if connectors for all boards
are connected properly.
Check if connectors of the cables for Y-axis
control board, X-axis control board, and the
main control board.
4
Check fuses.
Visually check if fuses are not cut out.
5
Reattach the cover of the main
control panel.
n
NOTE
There is a ground cable on the cover.
Be careful not to pinch it when the cover reattached.
Main control cover
Step 2
Four bolts fixing coverCover
53305-KMS-00
Main control panel
Step 3
FusesMain control board
Y-axis control board
X-axis control board
53306-KMS-00
3-6
3
Yearly maintenance items
1.4 Check the side door interlocks
n
NOTE
Check this item when the machine is turned on.
1
Check the operation status of the machine.
Comfirm machine power is on and no error happens.
2
Check the side door interlock of
right side of the machine.
1. Open the side door on right side of the
machine.
2. Confirm Operation indicator turns off.
3. Press [Initialize] in bottom of "WAREHOUS-
ES" screen after confirming operation
indicator lights green.
4. Confirm an error occurs causing prevent
initialization.
5. Press [Alerts] in bottom of the screen to
open "ALERTS" screen.
6. Select the error which occurred here,
and press [Read] to reset the error.
7. Press [X] on top right of "ALERTS" screen
to close it.
8. Close the side door.
TIP
It takes five seconds to turn on Operation indicator
after turn on Operation switch.
3
Check the side door interlock of
left side of the machine.
1. Open the side door on left side of the
machine.
2. Turn Operation switch left, then turn it
right.
3. Press [Initialize] in bottom of "WAREHOUS-
ES" screen after confirming operation
indicator lights green.
4. Confirm an error occurs causing prevent
initialization.
5. Press [Alerts] in bottom of the screen to
open "ALERTS" screen.
6. Select the error which occurred here,
and press [Read] to reset the error.
7. Press [X] on top right of "ALERTS" screen
to close it.
8. Confirm the handler faces forward and it
is placed in center of X-axis and Y-axis as
"Initialization standby position".
9. Close the side door.
4
Perform initialization.
1. Turn Operation switch left, then turn it
right.
2. Press [Initialize] in bottom of "Warehouse"
screen after confirming operation
indicator lights green.
Door interlock
Step 2,3
Door interlock
53307-KMS-00
[Initialize] button
[Initialize] button
Step 2-4
[Alerts] button
54301-KMS-00
“ALERTS” screen
Step 2,3
[Read] button
54302-KMS-00