YST15_Users_E.pdf - 第59页

2-31 2 Operation 7. [Add] button Able to register a new packaging 8. [Edit] button Able to edit a registered packaging. 9. [Remove] button, which is displayed only for engineer authority . Able to remove registered pac k…

100%1 / 182
2-30
2
Operation
n
Print List / Print not busy List
Select [Print list] / [Print not busy in line list] , then packagings are listed in "PRINT PREVIEW" screen.
Press [Save] button to saves the list in pdf format, press [Export] to button saves the list in XML format.
If the machine is connected to a printer through an external network, pressing [Print] button prints the list.
"PRINT PREVIEW" screen
[Print] button
[Save] button[Export] button
24232-KMS-00
5. [Extract] button
Tick the check boxes at left end of the packagings which require to be unloaded, and press [Extract] button, then the
ticked packagings are unloaded.
6. [Fast extract] button
If a certain packaging requires to be unloaded as soon as possible while the machine is unloading other packagings,
press this button with ticking the packaging so that the desired packaging can be unloaded earlier than the others.
n
NOTE
The packaging unloaded with [Fast extract] is placed at the lowest shelf of Loading/Unloading area.
"PACKAGING" screen
[Fast extract] button[Extract] button
24233-KMS-00
2-31
2
Operation
7. [Add] button
Able to register a new packaging
8. [Edit] button
Able to edit a registered packaging.
9. [Remove] button, which is displayed only for engineer authority.
Able to remove registered packagings, but packagings which are removed once are not able to be registered again, and
the histories of them are also removed in traceability.
c
CAUTION
DO NOT remove any registered packagings basically. Use "Disable" in Menu for useless packagings.
2-32
2
Operation
3.3.2 Register a packaging manually
Registering a packaging one by one is described.
1
Open "PACKAGING" screen.
2
Open the packaging registration screen.
Press [Add] button at bottom right to open the packaging registration screen.
"PACKAGING" screen
[Add] button
24234-KMS-00
3
Input necessary contents.
Input necessary contents. The mandatory contents are Quantity, Item code, Packaging type, and
Format.
Lot number, Partnumber, Manufacturer, and Datecode are mandatory in some cases.
n
NOTE
Put the mouse cursor on a input column and read the bar code of the packaging, then the value of it is input.
n
NOTE
Once "ADD" screen appears, the mouse cursor is initially at "Auto-recognizer".
If the prefix setting of bar codes are configured, reading bar codes in "Auto-recognizer" inputs some contents auto-
matically.
Input contents by reading bar code
23211-KMS-00