00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第128页
6 Gantries 6.4 Trailing cable and printed circuit boards 128 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 6.4.4 Replacing the Vision Base Interface (VBI) Parts, equipment and tools Fig.165: Vision Base Interfa…
6 Gantries
6.4 Trailing cable and printed circuit boards
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 127
6.4.3 Replacing the Trailing Cable Interface
Parts, equipment and tools
●
Trailing cable interface gantry 2 and 4 assembly [03071356-xx] or
●
Trailing cable interface gantry 1 and 3 assembly [03071355-xx]
NOTICE
Machines from serial number Hxxxx
From series no. Hxxxx the trailing interface must have at least FS02.
Overview
Fig.164: Overview of circuit boards
1. Cover on the trailing cable interface
2. Vision Base Interface
3. Trailing unit interface
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the screws fastening the cover on the trailing cable interface and remove the cover.
► Unplug the electrical connections to the trailing interface. You may want to mark the positions
of these connections to make clear assignment easier later on.
► Remove the screws fastening the trailing interface and remove the interface from the
machine.
Installation
► Follow the removal instructions in reverse order for installation.
6 Gantries
6.4 Trailing cable and printed circuit boards
128 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
6.4.4 Replacing the Vision Base Interface (VBI)
Parts, equipment and tools
Fig.165: Vision Base Interface (VBI) [03115474‑xx]
●
Vision Base Interface (VBI) [03115474‑xx]
Overview
Fig.166: Overview of circuit boards
1. Cover on the trailing cable interface
2. Vision Base Interface
3. Trailing unit interface
Fig.167: Vision Base Interface [03115474-xx]
The Vision Base Interface [03115474‑xx] is
fitted next to the trailing cable interface.
J1: Not used and not placed
J3: BoxPC
J4: Not used
J6: Power supply
J8: Stationary camera
J11: Trailing cable (head)
J19: Not used
J20: Not used
6 Gantries
6.4 Trailing cable and printed circuit boards
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 129
Removal/installation
► Removal and installation of the Vision Base Interface (VBI) is the same as that for the trailing
cable interface. Please read section 6.4.3
"Replacing the Trailing Cable Interface" [}127].
► Checking the embedded software and performing a download if needed (see LINK).
10.1 "eSW Download (SW 70x)" [}379]
6.4.5 Replacing the gantry interface
Parts, equipment and tools
●
Gantry interface gantry 1 and 3 SX4a [03089220-xx]
●
Gantry interface gantry 2 and 4 SX4a [03089221-xx]
NOTICE
Machines from Serial Number Hxxxx
The gantry interface version used for machines from serial number Hxxxx must be at least -03.
Overview
Fig.168: Gantry interface
1. Gantry interface
2. Trailing cable holder on gantry
Fig.169: Gantry interface [03089220-03]
Gantry interface [03089220-03]:
This gantry interface is used at gantries 1
and 3.
X3) Y axis motor power
X4) Y axis motor temperature sensor
X6) Y axis incremental encoder