00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第239页

7 Conveyor 7.8 Laser light barriers, fiber optic cable and PCB sensors Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 239 Fig.314: Setting the fiber optic sensor - 4

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

238 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021

Fig.313: Setting the fiber optic sensor - 3

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 239

Fig.314: Setting the fiber optic sensor - 4

7 Conveyor

7.8 Laser light barriers, fiber optic cable and PCB sensors

240 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021

7.8.9 Teaching the PCB sensors (SW70x)

Whenever you manually loosen the conveyor sides, you also need to reteach the light barrier

sensors. This is required because the light intensity varies according to the conveyor width. Without

teaching, the conveyor will show boards which are not present, preventing the conveyor from being

referenced.

Teaching is performed automatically during operation.

Procedure

Fig.315: Select operator level

► Select the button.

► Select the button.

► Switch over to the operator level Ma-

chine service.

ð The button will be shown.

Fig.316: Checking sensors and functions

► Click on the button.

► Click on the button.

► Click on the Conveyor inputs/outputs

button.

Fig.317: Teaching the sensors

► Click on the laser light barrier button.