00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第338页
9 Component feeding 9.4 Docking Station for Component Trolley 338 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 Fig.476: Docking station – back 1 Control valve [03003489-xx] 9.4.11 "Replacing the control v…
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 337
9.4 Docking Station for Component Trolley
DANGER
Observe User Manual
► Please observe the safety instructions in the user manual for all work!
9.4.1 Docking station for component trolley - overview
Fig.475: Docking station – front
1 Docking station – assembly [00116933-xx]
2 Unlocking pushbutton [00334095-xx]
9.4.10
"Replacing the unlocking pushbutton" [}351]
3 Power pack and pressure control valve for locking cylinder (behind the cover)
9.4.2
"Replacing the power pack" [}339]
4 Locking lever [03025104-xx]
9.4.5
"Replacing the locking lever" [}343]
5 Feeder unlock device 40-fold [03011582-XX]
9.4.7
"Replacing the 40-fold feeder unlocking device" [}346]
6 Feeder Control Unit (FCU)
9.4.8
"Replacing the Feeder Control Unit (FCU)" [}347]
7 Short-stroke cylinder for locking unit [03034831‑xx]
9.4.4
"Replacing the locking unit short-stroke cylinder" [}341]
9 Component feeding
9.4 Docking Station for Component Trolley
338 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Fig.476: Docking station – back
1 Control valve [03003489-xx]
9.4.11
"Replacing the control valve" [}353]
2 ON/OFF switch
3 Microfuse [03033387-xx]
9.4.3
"Replacing the micro switch" [}340]
4 Pressure control valve for bulkcase feeder and main connection (5.5 bar)
9.4.6 "Replacing the positions end switch of the component trolley locking device" [}344]
9.4.9 "Replacing the Complete Coupling - Earthing and Compressed Air for the Bulk
Case" [}350]
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 339
9.4.2 Replacing the power pack
NOTICE
Observing the technical information
► Observe the technical information "Power pack for docking station for component trol-
ley SIPLACE X [116933] and SX [116965] has been discontinued" [DE:
TI2015-04D07] [EN: TI2015-04E07].
Parts
Fig.477: Switching power supply RSP-500-27 [03121806‑xx]
03121806‑xx Switching power supply RSP-500-27 (replaces: [03025938‑xx])
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable tie
Voltage measuring device
Circuit diagram folder for your machine
Removal/installation
DANGER
Switch off the voltage supply
► Press the ON/OFF button to switch off and disconnect the power supply.
Fig.478: Removing the cover
The power pack(4) is located behind the
cover(1)
.
► Remove the four screws(3) fastening
the cover. The cover is clamped in
place with the help of the bar(2)
.
► Pull the cover out of the docking sta-
tion.
Pay attention to the ground connection.