00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第292页
9 Component feeding 9.1 Cutter 292 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 Installation Follow the removal instructions in reverse order for installation. Also observe the following instruc- tions: Fig.39…
9 Component feeding
9.1 Cutter
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 291
9.1.7 Replacing the protective plate
Parts
Fig.392: Protective plate
03019894‑xx Protective plate
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable tie
Overview
Fig.393: Protective plate on cutter
1. Protective plate [03019894-xx]
2. Five fastening screws
3. Clip connecting baffle plate and pro-
tective plate
CAUTION!
There is a risk of injuring yourself on
the cutting edge of the blades.
.
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.4 "Replacing the Cutter on the COT Insert [03066690-xx]" [}285]
► Remove the five screws fastening the protective plate.
► Straighten the two clips with pliers.
► Remove the protective plate from the cutter.
9 Component feeding
9.1 Cutter
292 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
Installation
Follow the removal instructions in reverse order for installation. Also observe the following instruc-
tions:
Fig.394: Fitting the protective plate
► Make sure that the five fastening
screws are completely countersunk.
The screws must be flush with the pro-
tective plate.
► Ensure that there is a gap between the
cutter blade and the edge of the baffle
plate inside(1)
.
► Once everything is correct, the baffle
plate should be present at this posi-
tion(2)
.
9.1.8 Replacing the articulated joint on the short-stroke cylinder
Parts
Fig.395: Joint
03000518-xx Articulated joint on the short-stroke cylinder
03057290-xx 2x hexagon socket fillister head screws ISO4762-M5x35-12.9, geomet. 321+VL
(screws for movable blade)
Equipment and tools
00376625‑xx Torque wrench 2.5‑25Nm
03121952-xx Lubrication grease BEM 34-132, 400 g cartridge
03123777-xx One-hand grease gun for 400 ml cartridge
00334892‑xx Loctite 243
00353832-xx Allen key set
Wire cutters
Cable tie
9 Component feeding
9.1 Cutter
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 293
Removing the articulated joint
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.4 "Replacing the Cutter on the COT Insert [03066690-xx]" [}285]
Fig.396: Cover plate
► Remove the screws(2) fastening the
top cover plate(1)
and then remove the
top cover plate.
Fig.397: Baffle plate
► Remove the two screws(1) at the front
side and five screws(2)
at the inner
side fastening the baffle plate.
► Remove the baffle plate unit from the
cutter.
Fig.398: Plastic caps
From the bottom side of the cutter you have
easy access to the plastic cap.
► Remove the plastic caps(1) over the
fastening screws on both sides of the
movable blade.
► Remove both screws.