00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第376页
9 Component feeding 9.6 Smart Pin Support 376 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 9.6.17 Replacing the press roller Parts, equipment and tools ● Press roller SPS [03092384Sxx] ● Circlip pliers size 0 (…
9 Component feeding
9.6 Smart Pin Support
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 375
9.6.16 Replacing the solenoid valve cable
Parts, equipment and tools
●
Cable SPS valve [03088170-xx]
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.539: Solenoid valves and control board
1. Solenoid valves
2. Control board
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the Pin Picker.
9.6.1 "Replacing the Pin Picker Assembly" [}357]
► Unplug the cable from the solenoid valves. You may want to mark the position, to make clear
assignment easier later on.
► Unthread the cable as far as the control board. Open the corresponding cable ties to help you,
if needed.
► Unplug the cable from the control board. You may want to mark the position, to make clear
assignment easier later on.
Installation
Follow the removal instructions in reverse order for installation. Observe the following note:
► Replace any opened cable ties.
9 Component feeding
9.6 Smart Pin Support
376 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.6.17 Replacing the press roller
Parts, equipment and tools
●
Press roller SPS [03092384Sxx]
●
Circlip pliers size 0 (supplier: http://www.hoffmann-tools.com – item no.:719770 J0)
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.540: Press roller
1. Circlip
2. Press roller
3. Press roller mount
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the Pin Picker.
9.6.1 "Replacing the Pin Picker Assembly" [}357]
Fig.541: Screws fastening the press roller mount
► Remove the two screws(1) fastening
the press roller mount.
► Remove the circlip on the press roller.
► Remove the press roller.
Installation
Follow the removal instructions in reverse order for installation.
9 Component feeding
9.6 Smart Pin Support
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 377
9.6.18 Replacing the Magazine Recognition Board
NOTICE
Technical information "SPS: Malfunction of magazine identification boards"
► If the magazine identification board fails, observe the technical information "SPS: Mal-
function of magazine identification boards" [DE: TI2014-07D06] [EN: TI2014-07E06].
NOTICE
From SW 706.1 SP2
From SW 706.1 SP2, magazines can be fitted without the "magazine recognition" function.
In this case, the machine can only be configured manually via the software (Autoconfig).
► For more information, please read the assembly instructions.
Parts, equipment and tools
●
Magazine recognition SPS assembly [03093494-xx]
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.542: Magazine recognition board (using example ofQ10
here)
1. Magazine recognition board
2. Power supply cable
3. Flat ribbon cable
4. Jumper
5. Metal bracket
Removal/installation
Refer to the assembly instructions for details of removal and installation:
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]