00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第289页
9 Component feeding 9.1 Cutter Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 289 Removal NOTICE Same procedure The removal and installation is described below using the example of the metal buffer. The removal a…
9 Component feeding
9.1 Cutter
288 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.1.5 Replacing the Metal Buffer/Spacer Distance Piece
Parts
Fig.387: Spacer and metal buffer
03007432‑xx Spacer
00329209‑xx Metal buffer M4.65 Shore
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable tie
Overview
Fig.388: Metal buffer and spacer distance piece on cutter
1. Metal buffer and spacer (two on each
side)
The metal butters absorb the cutting
vibration to the machine base.
9 Component feeding
9.1 Cutter
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 289
Removal
NOTICE
Same procedure
The removal and installation is described below using the example of the metal buffer. The
removal and installation of the spacer is the same as that for the metal buffer.
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.4 "Replacing the Cutter on the COT Insert [03066690-xx]" [}285]
Fig.389: Removing the metal buffer
► Remove the plastic cover(1).
► Take out the screws(2).
► Remove the complete mounting
strip(3)
.
► Remove the metal buffer.
Installation
Follow the removal instructions in reverse order for further installation.
9 Component feeding
9.1 Cutter
290 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.1.6 Replacing the baffle plate
Parts
Fig.390: Baffle plate
03019896‑xx Baffle plate
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable tie
Overview
Fig.391: Cutter
1. Baffle plate [03019896-xx]
2. Two fastening screws
3. Clip connecting baffle plate and pro-
tective plate
CAUTION!
Risk of injury
There is a risk of injuring yourself on
the cutting edge of the blades.
.
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the cutter from the machine.
9.1.4 "Replacing the Cutter on the COT Insert [03066690-xx]" [}285]
► Straighten the two clips with pliers.
► Remove the two screws fastening the baffle plate.
► Remove the baffle plate unit from the cutter.
Installation
Follow the removal instructions in reverse order for installation.