00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第328页

9 Component feeding 9.2 COT insert 328 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 Fig.461: Overview: assignment of sensors (without JTF) Removal ► Switch off the machine, disconnect it from the power supply …

9 Component feeding

9.2 COT insert

Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 327

9.2.12 Replacing the Reject Bin Sensors

Parts, equipment and tools

●

Reject bin query X-Series S [03089087-xx]

Overview

Fig.458: Sensors on standard COT insert

A) View from above

B) View from back

1. Connector for additional sensors

2. Connector for sensors (3) and (4)

3. Sensor for reject channel C&P20P

4. Sensor for reject bin (nozzles and com-

ponents CPP)

Fig.459: Sensors on COT insert with SPS

1. Sensor component reject bin (Twin and

CPP with stationary camera)

2. Sensor for reject channel C&P20 P

3. Sensor for reject bin (nozzles and com-

ponents CPP)

Fig.460: Sensors on COT insert with JTF

1. 2x sensors

Reject bin (Twin Head and CPP with

stationary camera)

Reject bin (nozzles)

2. Sensor for reject channel C&P20 P

9 Component feeding

9.2 COT insert

328 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021

Fig.461: Overview: assignment of sensors (without JTF)

Removal

► Switch off the machine, disconnect it from the power supply and secure it to prevent

unauthorized reactivation.

1.2 "Preparatory work..." [}16]

► When replacing the reject bin sensors: remove the reject bin.

► When replacing the empty tape duct sensor: dismantle the nozzle changer.

2.8.3 "Replacing the Nozzle Changer" [}40]

► Disconnect the sensor.

► Dismantle the sensor.

Installation

Follow the removal instructions in reverse order for installation. Also observe the following instruc-

tions:

► Setting the sensor (see below).

Setting the reject bin 6x6 mm sensor for C&P 20 and CPP

Set the sensor so that this just triggers when the reject bin or reject duct is fitted.

The sensors react to magnetically conductive materials. For this reason, they may only be fixed

with plastic screws.

CAUTION

Danger of head crash

If the sensor is not set correctly, it may trigger too late. The reject bin could then protrude,

causing a head crash.

9 Component feeding

9.2 COT insert

Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 329

Fig.462: Sensor mount for 6x6 reject duct

1 Sensor 2 Metal sensor MK2 prefitted [03080138-

xx]

3 ISO1479-ST3.5x6.5-C [03080219-xx] 4 Bracket [03080137-xx]

5 PT screw 3.5x7-ST-10 galvanized

[03087342‑xx]

6 Component reject duct 6x6

7 The distance between the reject bin and

the sensor

NOTICE

Plastic screws

Only use the plastic screws provided to fasten the sensor (5) "PT screw 3.5x7-ST-10 gal-

vanized" [03087342‑xx]!

► Insert the reject bin 6x6.

► Use the slots to set the sensor with the bracket (4) and the plastic screws "PT screw 3.5x7-

ST-10 gal. zinc" [03087342‑xx] while the machine is running, so that it just reacts when the

reject bin is fitted (6)

. The distance (7) between the reject bin and the sensor must be 5 mm. If

the distance is less, the reject bin could then protrude, causing a head crash.

► Observe the display on the user interface while the machine is running or the LED status for

sensor S1 (right LED 1/left LED 3) in test mode on the FCU.

► The reject bin may not have more than 2 mm upwards play.

See also

2 2.8.2 "Reject bin and sensors - overview" [}38]

2 2.8 "Nozzle Changers and Reject Boxes" [}36]