00198829-01_SM_X-Series-S_Hxxxx_EN.pdf - 第354页

9 Component feeding 9.5 Manual Table and JEDEC Tray Feeder 354 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 9.5 Manual Table and JEDEC Tray Feeder NOTICE See the assembly instructions For more information about…

100%1 / 382
9 Component feeding
9.4 Docking Station for Component Trolley
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 353
9.4.11 Replacing the control valve
Parts
Fig.503: Control valve
03003489-xx Control valve
Equipment and tools
00353832-xx Allen key set
Wire cutters
Cable tie
Removal/installation
1
Fig.504: Removing the control valve
 DANGER!
Switch off the voltage supply
Press the ON/OFF button to switch off
and then unplug the power supply.
Switch off the compressed air supply.
.
► Disconnect the electrical and pneu-
matic connections to the control
valve(1)
.
► Remove the screws fastening the con-
trol valve and then remove the control
valve.
► Install the new control valve.
► Reconnect to the electrical and com-
pressed air systems.
9 Component feeding
9.5 Manual Table and JEDEC Tray Feeder
354 Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021
9.5 Manual Table and JEDEC Tray Feeder
NOTICE
See the assembly instructions
For more information about the manual table and the JEDEC tray feeder, read the following
documents:
► Assembly instructions JEDEC Tray Feeder – X-Series S [00197446-xx]
► User manual JEDEC Tray Feeder [00197446-xx]
9.5.1 Manual table
Fig.505: Manual table
1. Fixture bar
2. FCU
3. Guide profiles on the front section
4. Fixture bar
5. Guide profiles on the back section
6. Fiducial feeder
7. Pneumatics
8. Feeder infeed
9. Location for the JTF
9.5.2 SIPLACE JTF-S
Fig.506: SIPLACE JTF-S – front
SIPLACE JTF-S [166670]:
1. Tray clamp
2. Toothed belt
3. Return tray pusher
4. Feeder control (behind cover)
9 Component feeding
9.5 Manual Table and JEDEC Tray Feeder
Service Manual SIPLACE X-Series S (from Hxxxx) 01/2021 355
Fig.507: SIPLACE JTF-S – back
1. Manual operation / Manual panel
2. Loading direction for empty JEDEC
trays
3. Tray pick position
4. Feeder control (back)
5. Tray switch thick/thin
6. Tray lift
9.5.3 Adapter
Fig.508: EEPROM and adapter board 30V
1. EEPROM
2. Adapter board 30 V