743844-015.pdf - 第157页

Display Features General Capabilities • Up to four simultaneous displays. — Single 8K60Hz panel, supported by joining two pipes over single port. — Up to 4x4K60Hz display concurrent. • Display interfaces supported: — DDI…

100%1 / 224
Figure 23. P, PX/U/U Refresh/H/H Refresh Processor Display Architecture
NOTE
For port availability in each of the processor lines, refer to the above table.
R
Intel
®
Core
™
, Xeon
™
6300 And Xeon
™
E 2400 Processors—Display
13
th
Generation Intel
®
Core
™
, Intel
®
Core
™
14
th
Generation, Intel
®
Core
™
Processor (Series 1) and (Series 2), Intel
®
Xeon
™
E
2400 Processor and Intel
®
Xeon
™
6300 Processor
Datasheet, Volume 1 of 2 May 2025
156 Doc. No.: 743844, Rev.: 015
Display Features
General Capabilities
• Up to four simultaneous displays.
— Single 8K60Hz panel, supported by joining two pipes over single port.
— Up to 4x4K60Hz display concurrent.
• Display interfaces supported:
— DDI interfaces supports DP*, HDMI*, eDP*, DSI*
— TCP interfaces supports DP*, HDMI*, Display Alt Mode over Type-C and
Display tunneled.
— Up to two wireless display captures.
• Audio stream support on external ports.
• HDR (High Dynamic Range) support.
• Four Display Pipes - Supporting blending, color adjustments, scaling and dithering.
• Transcoders - Containing the Timing generators supporting eDP*, DP*, HDMI*
interfaces.
• Up to two Low Power optimized pipes supporting Embedded DisplayPort* and/or
MIPI* DSI.
— LACE (Localized Adaptive Contrast Enhancement), supported up to 5 K
resolutions.
— 3D LUT - power efficient pixel modification function for color processing.
— FBC (Frame Buffer Compression) - power saving feature.
Multiple Display Configurations
The following multiple display configuration modes are supported (with appropriate
driver software):
• Single Display is a mode with one display port activated to display the output to
one display device.
• Display Clone is a mode with up to four display ports activated to drive the display
content of same color depth setting but potentially different refresh rate and
resolution settings to all the active display devices connected.
• Extended Desktop is a mode with up to four display ports activated to drive the
content with potentially different color depth, refresh rate, and resolution settings
on each of the active display devices connected.
High-bandwidth Digital Content Protection (HDCP)
HDCP is the technology for protecting high-definition content against unauthorized
copy or unreceptive between a source (computer, digital set top boxes, and so on) and
the sink (panels, monitor, and TVs). The processor supports both HDCP 2.3 and 1.4
content protection over wired displays (HDMI* and DisplayPort*).
The HDCP 1.4, 2.3 keys are integrated into the processor.
10.3
10.3.1
10.3.2
10.3.3
R
Display—Intel
®
Core
™
, Xeon
™
6300 And Xeon
™
E 2400 Processors
13
th
Generation Intel
®
Core
™
, Intel
®
Core
™
14
th
Generation, Intel
®
Core
™
Processor (Series 1) and (Series 2), Intel
®
Xeon
™
E
2400 Processor and Intel
®
Xeon
™
6300 Processor
May 2025 Datasheet, Volume 1 of 2
Doc. No.: 743844, Rev.: 015 157
DisplayPort*
The DisplayPort* is a digital communication interface that uses differential signaling to
achieve a high-bandwidth bus interface designed to support connections between PCs
and monitors, projectors, and TV displays.
A DisplayPort* consists of a Main Link (four lanes), Auxiliary channel, and a Hot-Plug
Detect signal. The Main Link is a unidirectional, high-bandwidth, and low-latency
channel used for transport of isochronous data streams such as uncompressed video
and audio. The Auxiliary Channel (AUX CH) is a half-duplex bi-directional channel used
for link management and device control. The Hot-Plug Detect (HPD) signal serves as
an interrupt request from the sink device to the source device.
The processor is designed in accordance with VESA* DisplayPort* specification. Refer
to Display Technologies Support on page 153.
Figure 24. DisplayPort* Overview
Source Device Sink Device
Main Link
(Isochronous Streams)
AUX CH
(Link/Device Managemet)
Hot-Plug Detect
(Interrupt Request)
DisplayPort Tx
(Processor)
DisplayPort Rx
• Support main link of 1, 2, or 4 data lanes.
• Link rate support up to UHBR20 (UHBR13.5 is not supported).
• Aux channel for Link/Device management.
• Hot Plug Detect.
• Support up to 36 BPP (Bit Per Pixel).
• Support SSC.
• Support YCbCR 4:4:4, YCbCR 4:2:0, YCbCR 4:2:2, and RGB color format.
• Support MST (Multi-Stream Transport).
• Support VESA DSC 1.1.
• Adaptive Sync.
Multi-Stream Transport (MST)
• The processor supports Multi-Stream Transport (MST), enabling multiple monitors
to be used via a single DisplayPort connector.
• Maximum MST DP supported resolution:
10.3.4
10.3.4.1
R
Intel
®
Core
™
, Xeon
™
6300 And Xeon
™
E 2400 Processors—Display
13
th
Generation Intel
®
Core
™
, Intel
®
Core
™
14
th
Generation, Intel
®
Core
™
Processor (Series 1) and (Series 2), Intel
®
Xeon
™
E
2400 Processor and Intel
®
Xeon
™
6300 Processor
Datasheet, Volume 1 of 2 May 2025
158 Doc. No.: 743844, Rev.: 015