LCX_UserManual_en_08_1.pdf - 第124页

General instrument functions R&S ® LCX Series 124 User Manual 1 179.2260.02 ─ 08 Figure 9-3: File information Retrieving device documentation Y ou can retrieve the R&S LCX Open Source Acknowledgment documentation…

100%1 / 265
General instrument functions
R&S
®
LCX Series
123User Manual 1179.2260.02 ─ 08
Figure 9-2: File manager dialog
The "File Manager" dialog shows a navigator of the memory directories, and you
can copy or delete files, as known from common file explorers. The functions provi-
ded are self-explanatory in conjunction with the softkeys labeled accordingly.
How to: see Section 9.1.4, "Using the file manager", on page 123.
Copy
Copies selected files to a destination directory.
Copy from internal memory to USB.
Copy from USB to internal memory.
Delete
Removes selected files from the directory.
Deletes the selected file.
Remote command:
DATA:LIST? on page 198
DATA:DELete on page 198
9.1.4 Using the file manager
We assume that the functions provided in the file manager dialog are known. Hence
this section only shows specific functions that are not recognizable at first glance.
Retrieving file information
To view information on the selected file:
1. Select [settings] > "Device" > "File Manager".
2. Select the directory.
3. Tap and hold the file of interest.
The R&S LCX shows the metadata of the selected file.
File and data management
General instrument functions
R&S
®
LCX Series
124User Manual 1179.2260.02 ─ 08
Figure 9-3: File information
Retrieving device documentation
You can retrieve the R&S LCX Open Source Acknowledgment documentation from the
instrument documentation folder /int/documentation.
To view information on the selected file:
1. Select [settings] > "Device" > "File Manager".
2. Select the directory.
3. Tap and hold the file of interest.
The R&S LCX shows the metadata of the selected file.
Figure 9-4: File information
Retrieving device documentation
You can retrieve the R&S LCX OSA documentation directly from the instrument.
To view the OSA document:
1. Connect a USB memory stick to the USB B connector at the front panel of the
instrument.
2. To access the file manager, select [settings] > "Device" > "File Manager".
3. In the file manager dialog, select the /int/documentation documentation
folder.
The R&S LCX displays the available files in the documentation folder.
4. Select the file that you want to copy.
5.
Copy the selected file with to the USB memory stick.
Note: If a file with a similar filename exists already, the R&S LCX displays a file
system error and aborts the copy process.
Delete the existing file, then you can copy the file from the R&S LCX to the USB
flash drive.
Now you can view the document on a PC.
File and data management
General instrument functions
R&S
®
LCX Series
125User Manual 1179.2260.02 ─ 08
9.1.5 Data and file types
The R&S LCX distinguishes the files according to their extensions; each type of file is
assigned a specific file content and also a specific file extension. The extension is pre-
defined, e.g. you can save and load files with logging data only as *.csv files.
Table 9-1: Overview of data and file types
Data type File extension Description
Binning
*.csv
See Section 8.8.5, "Binning",
on page 110
Documentation
*.pdf
Getting Started manual, and OSA (Open
Source Acknowledgment).
Logging
*.csv
See Section 8.8.3, "Logging",
on page 101
Screenshot
*.png
See Section 9.4, "Screenshot",
on page 128
Settings
*.savrcl
See Section 9.12, "Save/recall",
on page 142
Service
*.rsd
Device information
*.rsd
See Section 9.10, "Device information",
on page 138
Firmware
*.rsu
See Section 9.11, "Update device",
on page 140
Licenses
*.xml
See Section 9.9, "Licenses", on page 135
9.2 Interfaces
The R&S LCX provides a LAN, a USB and, optionally a GPIB (IEC/IEEE) bus interface
for controlling the instrument remotely.
In the "Interfaces" menu, you can access the settings dialogs for configuring the gen-
eral network environment and specific identification parameters of the instrument.
The following description introduces the access to the interface settings. For detailed
information on connection, protocols and additional configurations, see Section 10,
"Network operation and remote control", on page 149. This section also covers the set-
ting parameter descriptions and step-by-step instructions for setting up remote control
for each interface.
9.2.1 Interface settings
Access:
1. Press the [settings] key at the front panel.
Interfaces