LCX_UserManual_en_08_1.pdf - 第137页
General instrument functions R&S ® LCX Series 137 User Manual 1 179.2260.02 ─ 08 3. Select "Add" to open the "Enter License Key" keypad. Figure 9-13: License key on-screen keypad 4. Enter the key …
General instrument functions
R&S
®
LCX Series
136User Manual 1179.2260.02 ─ 08
● "Deactivation" displays options whose licenses have expired or which have
been removed.
With the softkeys on the left, you can register a new option, and activate or deacti-
vate registered options.
How to: see Section 9.9.2, "Managing licenses", on page 136.
Add / Remove
Opens an on-screen keypad to enter the license key manually.
Enables you to register a new option.
Enables you to remove a registered option.
Load File
Opens a file manager window to load a license key file, e.g. from a connected USB
memory device.
9.9.2 Managing licenses
An option is ready for operation after it is enabled with an activation code, referred to
as a license key. To activate an option and to unlock the features that are bound to the
option, you need to reboot the R&S LCX.
The following examples guide you through the steps of registering or deactivating
licenses.
Loading the license key from a file
To install an XML file, proceed as follows:
1. On a PC, copy the *.xml file containing the license key to a USB memory stick.
2. Connect the USB flash drive to the USB B connector at the front panel of the
instrument.
3. To access the license manager dialog, select settings > "Device" > "Licenses".
4. Select "Load File" to load the license file from the USB flash drive.
The R&S LCX applies the license key. It displays a message "Devicekey is instal-
led".
Note: For the license to take effect, the R&S LCX must reboot.
5. Switch the instrument off and on again using the On/Standby key.
The instrument restarts and activates the option and its features. It lists the option
in the "Active" window.
Inserting the license key manually
To enter the license key manually:
1. Get the sheet with the license key.
2. To access the license manager dialog, select [settings] > "Device" > "Licenses".
Licenses
General instrument functions
R&S
®
LCX Series
137User Manual 1179.2260.02 ─ 08
3. Select "Add" to open the "Enter License Key" keypad.
Figure 9-13: License key on-screen keypad
4. Enter the key (30-digits) of the option in the entry box.
5. Review your input carefully.
6.
Confirm with
.
The R&S LCX applies the license key. It displays a message "Devicekey is instal-
led".
Note: For the license to take effect, the R&S LCX must reboot.
7. Switch the instrument off and on again using the On/Standby key.
The instrument restarts and activates the option and its features. It lists the option
in the "Active" window.
Removing a license key
To remove a registered option, you must also enter the license key. You can load the
license key either from the *.xml file or enter it manually.
1. To upload the key from the *.xml file, proceed as described in "Loading the
license key from a file" on page 136.
2. To remove the option manually, select "Remove" in the license dialog.
The R&S LCX displays the "Enter Deactivation Key" on-screen keypad.
3. To enter the license key, proceed the same way as described in "Inserting the
license key manually" on page 136.
The instrument uninstalls the license and displays the message "Devicekey is
removed". It deactivates the option displays it in the "Deactivation" window.
4. For the deactivation to take effect, restart the R&S LCX.
The instrument restarts and lists the deactivated in the "Deactivation" window.
Licenses
General instrument functions
R&S
®
LCX Series
138User Manual 1179.2260.02 ─ 08
9.10 Device information
To get an overview on the configuration of your instrument, you can retrieve informa-
tion on the instrument model, its hardware components and interfaces using the device
information function.
9.10.1 Device information settings
Access:
1. Press the [settings] key at the front panel.
2. In the "Device" tab, select "Device Information".
The "Device Information" window shows the characteristics of the instrument
assemblies. It also indicates the remaining available internal memory.
The required remote commands are described in Section 11.18, "SYSTem subsystem",
on page 231.
Device Information...................................................................................................... 138
Create Dump File........................................................................................................139
Device Information
Displays the main instrument information.
"Model"
Designation of the instrument.
"ID"
Part number of the instrument.
"Serial No.:"
Serial number of the instrument.
"Version"
Currently installed firmware version.
How to: see Section 9.11, "Update device", on page 140
"FPGA"
Version of the installed FPGA.
"Hardware IDs"
Unique serial number of the front and mainboard of the instrument.
Device information