LCX_UserManual_en_08_1.pdf - 第208页

Remote control commands R&S ® LCX Series 208 User Manual 1 179.2260.02 ─ 08 FETCh:VOL T age:TRANsformer[:PRIMary]? Queries the recently measured primary transformer voltage value. If an invalid value is returned, the…

100%1 / 265
Remote control commands
R&S
®
LCX Series
207User Manual 1179.2260.02 ─ 08
Return values:
<AC Current
Measurement Value>
Default unit: A
Example: See Example "Querying measurement values" on page 205.
Usage: Query only
FETCh:IMPedance?
Queries the recently measured impedance values Z and Θd.
If an invalid value is returned, the instrument reports error code -230.
Return values:
<Primary
Measurement Value>
Selects the impedance measurement parameter.
Default unit: Ohm
<Secondary
Measurement Value>
Selects the phase angle measurement parameter.
Example: See Example "Acquiring measurement readings" on page 205.
Usage: Query only
FETCh:VOLTage:DC?
Queries the most recent DC voltage measurement value.
If an invalid value is returned, the instrument reports error code -230.
Return values:
<DC Voltage
Measurement Value>
Default unit: V
Example: See Example "Querying measurement values" on page 205.
Usage: Query only
FETCh:VOLTage:TRANsformer:SECondary?
Queries the recently measured secondary transformer voltage value.
If an invalid value is returned, the instrument reports error code -230.
Return values:
<Secondary Voltage
Measurement Value>
Default unit: V
Example: See Example "Querying measurement values" on page 205.
Usage: Query only
FETCh subsystem
Remote control commands
R&S
®
LCX Series
208User Manual 1179.2260.02 ─ 08
FETCh:VOLTage:TRANsformer[:PRIMary]?
Queries the recently measured primary transformer voltage value.
If an invalid value is returned, the instrument reports error code -230.
Return values:
<Primary Voltage
Measurement Value>
Default unit: V
Example: See Example "Querying measurement values" on page 205.
Usage: Query only
FETCh:VOLTage[:AC]?
Queries the most recent AC voltage measurement value.
If an invalid value is returned, the instrument reports error code -230.
Return values:
<AC Voltage
Measurement Value>
Default unit: V
Example: See Example "Querying measurement values" on page 205.
Usage: Query only
FETCh[:TYPE]? [<Measurement Type Pair>]
Queries the recently measured values for the specified measurement pair.
Without specifying the measurement pair, the instrument returns the values of the pri-
mary measurement pair.
If an invalid value is returned, the instrument reports error code -230.
Query parameters:
<Measurement Type
Pair>
DEFault | CPD | CPQ | CPG | CPRP | CSD | CSQ | CSRS |
LPD | LPQ | LPG | LPRP | LSD | LSQ | LSRS | RX | RPB | RDC |
MTD | NTD | ZTD | ZTR | GB | YTD | YTR
Return values:
<Primary
Measurement Value>
Selects the first measurement parameter.
<Secondary
Measurement Value>
Selects the second measurement parameter.
Example: See Example "Acquiring measurement readings" on page 205.
Usage: Query only
FETCh subsystem
Remote control commands
R&S
®
LCX Series
209User Manual 1179.2260.02 ─ 08
11.11 FUNCtion subsystem
The FUNCtion subsystem enables you to configure the measurement type and
ranges.
FUNCtion subsystem