LCX_UserManual_en_08_1.pdf - 第239页

Remote control commands R&S ® LCX Series 239 User Manual 1 179.2260.02 ─ 08 SYST em:COMMunicate:NETWork:VNC[:ST A T e] <En-/Disable VNC> Activates the VNC interface for remote access. Parameters: <En-/Disabl…

100%1 / 265
Remote control commands
R&S
®
LCX Series
238User Manual 1179.2260.02 ─ 08
SYSTem:COMMunicate:LAN:HOSTname <Device hostname>
Sets an individual hostname for the R&S LCX.
Parameters:
<Device hostname>
Example: See Example "Network communication settings" on page 234.
Manual operation: See "Desired Hostname" on page 161
SYSTem:COMMunicate:LAN:MAC?
Queries the MAC address of the network.
Example:
See Example "Network communication settings" on page 234.
Usage: Query only
Manual operation: See "MAC Address" on page 163
SYSTem:COMMunicate:LAN:RESet
Terminates the network configuration and restarts the network.
Example:
See Example "Network communication settings" on page 234.
Usage: Event
Manual operation: See "Reset LAN Conection" on page 163
SYSTem:COMMunicate:LAN:SMASk <Subnet mask>
Sets the subnet mask.
Parameters:
<Subnet mask>
Example: See Example "Network communication settings" on page 234.
Manual operation: See "Subnet Mask" on page 163
SYSTem:COMMunicate:NETWork:VNC:PORT <Port>
Sets the VNC port address.
Parameters:
<Port> Range: 100 to 65535
*RST: n.a. (factory preset: 5900)
Example: See Example "Network communication settings" on page 234.
Manual operation: See "VNC Port" on page 164
SYSTem subsystem
Remote control commands
R&S
®
LCX Series
239User Manual 1179.2260.02 ─ 08
SYSTem:COMMunicate:NETWork:VNC[:STATe] <En-/Disable VNC>
Activates the VNC interface for remote access.
Parameters:
<En-/Disable VNC> ON | OFF | 1 | 0
*RST: n.a. (factory preset: 0)
Example: See Example "Network communication settings" on page 234.
Manual operation: See "Enabled" on page 164
SYSTem:COMMunicate:NETWork:VNC:PORT
<Port>
Sets the VNC port address.
Parameters:
<Port> Range: 100 to 65535
*RST: n.a. (factory preset: 5900)
Example: See Example "Network communication settings" on page 234.
Manual operation: See "VNC Port" on page 164
SYSTem:COMMunicate:NETWork:VNC[:STATe] <En-/Disable VNC>
Activates the VNC interface for remote access.
Parameters:
<En-/Disable VNC> ON | OFF | 1 | 0
*RST: n.a. (factory preset: 0)
Example: See Example "Network communication settings" on page 234.
Manual operation: See "Enabled" on page 164
SYSTem:DATE <Year>, <Month>, <Day>
Sets or queries the date for the instrument-internal calendar.
Parameters:
<Year> Sets the year.
Range: 2010 to 2037
<Month> Sets the month.
Range: 1 to 12
<Day> Sets the day.
Range: 1 to 31
Example: See Example "General instrument settings" on page 232.
Manual operation: See "Set Date" on page 133
SYSTem subsystem
Remote control commands
R&S
®
LCX Series
240User Manual 1179.2260.02 ─ 08
SYSTem:HW:VERSion?
Queries the hardware version of the instrument.
Example: See Example "General instrument settings" on page 232.
Usage: Query only
Manual operation: See "Device Information" on page 138
SYSTem:KEY:BRIGhtness <Front key brightness>
Sets the brightness of the front panel keys.
Parameters:
<Front key
brightness>
Range: 0.1 to 1
Increment: 0.1
*RST: 0.8
Default unit: %
Example: See Example "General instrument settings" on page 232.
Manual operation: See "Key Brightness" on page 134
SYSTem:LOCal
Enables manual operation, i.e. unlocks front panel control.
To lock manual control, use command SYSTem:RWLock on page 241.
Example:
See Example "General instrument settings" on page 232.
Usage: Event
SYSTem:REMote
Activates remote control.
The R&S LCX switches to remote state, and locks all front panel controls.
You can control the R&S LCX remotely. Sending a command sets the instrument to
remote state, indicated by the white SCPI icon in the status bar.
To return to manual control, use command SYSTem:LOCal on page 240.
Example:
See Example "General instrument settings" on page 232.
Usage: Event
SYSTem:RESTart
Restarts the instrument without restarting the operating system.
Example:
See Example "General instrument settings" on page 232.
Usage: Event
SYSTem subsystem