LCX_UserManual_en_08_1.pdf - 第247页
Maintenance, storage and disposal R&S ® LCX Series 247 User Manual 1 179.2260.02 ─ 08 14 Maintenance, storage and disposal We advise to check the nominal data from time to time. 14.1 Cleaning How to clean the product…
Transporting
R&S
®
LCX Series
246User Manual 1179.2260.02 ─ 08
13 Transporting
Lifting and carrying
See:
●
"Lifting and carrying the product" on page 10
●
Section 4.1.1, "Lifting and carrying", on page 18.
Packing
Use the original packaging material. It consists of antistatic wrap for electrostatic pro-
tection and packing material designed for the product.
If you do not have the original packaging, use similar materials that provide the same
level of protection. You can also contact your local Rohde & Schwarz service center for
advice.
Securing
When moving the product in a vehicle or using transporting equipment, make sure that
the product is properly secured. Only use items intended for securing objects.
Transport altitude
Unless otherwise specified in the data sheet, the maximum transport altitude without
pressure compensation is 4500 m above sea level.
Maintenance, storage and disposal
R&S
®
LCX Series
247User Manual 1179.2260.02 ─ 08
14 Maintenance, storage and disposal
We advise to check the nominal data from time to time.
14.1 Cleaning
How to clean the product is described in "Cleaning the product" on page 11.
Do not use any liquids for cleaning. Cleaning agents, solvents, acids and bases can
damage the front panel labeling, plastic parts and display.
14.2 Changing fuses
The R&S LCX is protected by two fuses, which you can check and replace, if there are
any problems:
●
F1: Line fuse
If the R&S LCX does not start, it is possible that a blown line fuse is the cause. In
this case, check the line fuse and replace it, see Replacing the line fuse.
●
F2: Bias fuse
Protects the bias voltage input from overload to avoid damage of the circuitry. Reg-
ularly check the condition of the fuse and replace it in case it is blown or damaged,
see "Replacing the external bias fuse" on page 22.
If you have still problems, contact Rohde & Schwarz customer service at www.rohde-
schwarz.com/support.
14.3 Storage
Protect the product against dust. Ensure that the environmental conditions, e.g. tem-
perature range and climatic load, meet the values specified in the specifications docu-
ment.
14.4 Disposal
Rohde & Schwarz is committed to making careful, ecologically sound use of natural
resources and minimizing the environmental footprint of our products. Help us by dis-
posing of waste in a way that causes minimum environmental impact.
Disposal
Maintenance, storage and disposal
R&S
®
LCX Series
248User Manual 1179.2260.02 ─ 08
Disposing of electrical and electronic equipment
A product that is labeled as follows cannot be disposed of in normal household waste
after it has come to the end of its life. Even disposal via the municipal collection points
for waste electrical and electronic equipment is not permitted.
Figure 14-1: Labeling in line with EU directive WEEE
Rohde & Schwarz has developed a disposal concept for the eco-friendly disposal or
recycling of waste material. As a manufacturer, Rohde & Schwarz completely fulfills its
obligation to take back and dispose of electrical and electronic waste. Contact your
local service representative to dispose of the product.
Disposal