YSi-SP_Ope_E.pdf - 第118页

2-81 2 Operation 7. Silk cut 3 5 1 2 4 242B4-KMN-00 1. T ouch the [Solder Insp] button. T ouch the [Silk Cut] button. 2. T ouch the [<<] or [>>] button to select the field of view . 3. T ouch the [Check] butt…

100%1 / 147
2-80
2
Operation
5. 3D inspection
3
4
1
2
242B2-KMN-00
1. Touch the 3D Inspection Button. For a start, adjust the first light projector. Touch the [3D inspection] button.
2. Touch the [<<] or [>>] button to select the field of view.
3. Touch the [Check] button to display the results of check on the screen. The color gradation helps recognize the height
variation.
For height check, zero levels must be defined.
To check the height, define the zero level first.
4. After checking, select a pad in the field of view image to show the shape of the designated point.
6. Z-axis light source
3
1
2
242B3-KMN-00
1. Touch the [Z-axis light] button.
2. Touch the [<<] or [>] button to select the field of view.
3. Touch the [Check] button to display the results on the screen.
Checks whether extracted along the stripe.
2-81
2
Operation
7. Silk cut
3
5
1
2
4
242B4-KMN-00
1. Touch the [Solder Insp] button. Touch the [Silk Cut] button.
2. Touch the [<<] or [>>] button to select the field of view.
3. Touch the [Check] button to display the result on the screen.
Check whether the silk part of the PCB and the exposure part of the electrode turn to pink color.
The pink colored part is the part which shall be silk-cut.
4. Adjust the [Silk Cut Level] so that the silk part becomes pink.
5. To invalidate silk cutting, select [No insp].
2-82
2
Operation
8. Bad Mark
4
1
3
5
2
242B5-KMN-00
1. Touch the [Bad mark] tab.
TIP
The bad mark tab is displayed only if a bad mark is registered in the inspection program.
2. Select the light source to be used and adjust the light intensity.
3. When necessary, select Normal extract or Rev/Extr.
4. Touch [<<] or [>>] to select the bad mark to be checked.
5. Touch
[
Check] to show results.
6
7
242B6-KMN-00
6. To adjust the bad mark position or the like, touch the Set tab.
7. Adjust the
[
threshold level], [Judge level], [Size] and coordinates so that the bad mark is extracted correctly.