YSi-SP_Ope_E.pdf - 第39页
2-2 2 Operation 1.2 System configuration System Configuration PC Back-and-forth communication Camera Tower light Conveyor Data station Lighting unit Mouse Keyboard Operation panel Safety switch, emergency stop XYZ table …
2-1
2
Operation
1. Configuration
1.1 Overall View
Overall View
Tower light
Emergency stop button
Operation panel
Keyboard
Power
Control panel
Control PC
23201-KMN-00
2-2
2
Operation
1.2 System configuration
System Configuration
PC
Back-and-forth communication
Camera
Tower lightConveyor
Data station
Lighting unit
Mouse
Keyboard
Operation
panel
Safety switch, emergency stop
XYZ table
Programmable
controller control panel
23202-KMN-00
2-3
2
Operation
1.3 Tower Light Display
The tower light of the inspection machine has built-in 3-color LEDs and a buzzer.
(3-color LEDs: red at the top, yellow in the center and green at the bottom)
The lighting conditions of the tower light are shown below.
Tower light lighting condition Red Yellow Green Buzzer
At emergency stop
Upon continuous faults
During automatic operation
When a faulty PCB is ejected
Upon a warning
(5sec)
(5sec)
Upon stoppage due to continuous
warnings
1.4 Emergency Stop
Press the emergency stop button located on the right side of the front panel of the main body to stop the
equipment immediately with a buzzer sound. Use the switch to stop in an emergency.
After an emergency stop, follow the procedure below to restore.
1) Touch the [RESET] button on the screen to stop the buzzer.
2) Reset the emergency stop switch. (Turn it in the direction of arrows.)
3) Touch the [RESET] button again and check that the [RESET] button is unlit.