YSi-SP_Ope_E.pdf - 第77页

2-40 2 Operation 3.6.3 User Authentication Select “Function/Setting” of the inspection machine for user authentication. Place a chec k mark in the user authentication check box to perform user authentication during start…

100%1 / 147
2-39
2
Operation
3.6.1 I/O Data Display Screen
The ON/OFF state of input/output signals of the machine can be monitored.
Touch the [I/O data] button to open the screen shown below.
24247-KMN-00
・
Out (output) : The active output is indicated in red.
・
IN (input) : The active input is indicated in red.
3.6.2 Image Save Setting
Configure the inspection image saving function.
1
2
3
4
24248-KMN-00
No Name Description of displayed item and functions
1 Save Image
•
ALL : All pads are saved without relations to the inspection result or setting.
•
Select : The image is saved according to the entered conditions.
•
Not Save : The image preservation is not done.
2 Object pad
•
NG Pad : Save faulty pads.
•
WARN Pad : Save WARN pads.
•
Select Parts : Save selected parts. The function does not depend on the inspection result.
(For the setting method, refer to Section 3.3.9 in the Data Station Volume.)
•
Profile Save Setting : Select the part to be stored.
3
Confirmation of capacity
of disk [MB]
Specify the free disk space to stop outputting the inspection result.
If the free disk space of the destination of saving falls below the setting, the inspection
machine is stopped with a warning message.
4 Store Color Image Change the stored image to the color image. (* The inspection cycle time becomes longer.)
2-40
2
Operation
3.6.3 User Authentication
Select “Function/Setting” of the inspection machine for user authentication.
Place a check mark in the user authentication check box to perform user authentication during startup of the
inspection machine.
1
2
4
3
5
24249-KMN-00
1. Login
Touch the [Login] button to open the user authentication window.
1
2 3
24250-KMN-00
1. Select the user name in the drop-down menu.
2. Enter the password at the ten-key pad.
3. Touch the [OK] button.
2. Logout
Touch the [Logout] button after you have logged in, to log out.
2-41
2
Operation
3. Adding a user
Touch the [Add user] button to open the window shown below.
1
3
4
2
24251-KMN-00
1. Enter the name of the new user.
2. Enter the password at the ten-key pad.
3. Select the account.
4. Touch the [OK] button.
4. Changing the password
Touch the [Change password] button to open the window shown below.
2
3
1
24252-KMN-00
1. Enter the current password at the ten-key pad.
2. Enter the new password.
3. Touch the [OK] button.