YSi-SP_Ope_E.pdf - 第93页

2-56 2 Operation 3.7.1 Data transfer V arious data such as the inspection progr am can be transferred through communications with the data station. 1. Select the data type to be tr ansferred, using the tab 1. 2. Select t…

100%1 / 147
2-55
2
Operation
3.7 Engineer Mode
Items displayed on the engineer mode screen and functions are described. You can create or edit inspection
programs and various pieces of data on the engineer mode screen.
3
8
9
4
5
6
7
1
2
24274-KMN-00
No Description Refer to
1 New PCB data is created.
For the creation method using a printed PCB, refer to "4.1 Creating new
PCB data (printed PCB)" in this volume. In other cases, refer to Section
3.2 in the Data Station Volume.
2 Existing PCB data is edited. For details, refer to "4.2 Editing PCB Data" of this volume.
3 The light intensity is adjusted. For details, refer to "4.2.3 Light Intensity Adjustment" in this volume.
4 New spec data is created. For details, refer to Section 3.4 in the Data Station Volume.
5 Existing spec data is edited. For details, refer to Section 3.4 in the Data Station Volume.
6 A new parts library is created. For details, refer to Section 3.5 in the Data Station Volume.
7 An existing parts library is edited. For details, refer to Section 3.5 in the Data Station Volume.
8 Data transfer
Various data can be transferred to the data station.
(Refer to "3.7.1 Data transfer".)
9 LED diag (Option)
Problems in the LED brightness can be checked. (Refer to "3.7.2 LED
diag (Option)".)
2-56
2
Operation
3.7.1 Data transfer
Various data such as the inspection program can be transferred through communications with the data station.
1. Select the data type to be transferred, using the tab 1.
2. Select the desired file from the list and place a check mark.
3. Press the
➡
or
➡
button to transfer.
4. Press the [Delete] button to delete.
1
2
34
24275-KMN-00
2-57
2
Operation
3.7.2 LED diag (Option)
Place a jig for checking the light source and touch the LED diag button. The screen shown below is displayed.
During light source diagnosis, you can check deterioration of the LED.
24276-KMN-00
1. Press the LED diag button. Results are displayed in the Judge field. If OK is displayed, there is no problem; you can
continue to use.
2. If NG is displayed, make calibration.
If NG is displayed even after calibration is made, LED replacement is necessary.
Please contact Yamaha sales representatives.
21
24277-KMN-00