YSi-SP_Ope_E.pdf - 第86页
2-49 2 Operation 3.6.9 User authority setting T he view display ed for a login account type designated in user authentication can be changed. T o enter the user authority setting, a tec hnician account must be created in…
2-48
2
Operation
5
A confirmation message is displayed. Select "Yes" to continue inspection.
24264-KMN-00
6
After inspection is finished, results of inspection are displayed as if in a regular
procedure.
24265-KMN-00
2-49
2
Operation
3.6.9 User authority setting
The view displayed for a login account type designated in user authentication can be changed.
To enter the user authority setting, a technician account must be created in advance.
n
NOTE
Only the technician authority can change settings; no change can be made to the operator and engineer accounts.
The authority is: operator < technician < engineer.
1. Register a user having technician authority through user addition procedure.
1
24266-KMN-00
2. Log in with the engineer authority, and select the User authority setting button.
3. Place check marks for desired items to be displayed when you log in with the technician authority, and select SAVE or
OK to register the setting.
4. When you log in with the technician authority next time, the designated contents are displayed.
3
24267-KMN-00
2-50
2
Operation
3.6.10 Pad NG info
Place a check mark at Pad NG info Show to show NG and WARN data for the individual pad.
The NG data is displayed at the following place during inspection.
Displayed characters correspond to the corresponding inspection item.
24268-KMN-00