YSi-SP_Ope_E.pdf - 第18页
1-2 1 Over view and maintenance of machine 2. About this manual The manuals of this machine are categorized as follows. • "YSi-SP Operators Manual" • "YSi-SP Programming Manual Data Station" • "Y…
1-1
1
Overview and maintenance of machine
1. Preface
Thank you very much for purchasing the solder paste inspection machine, “YSi-SP”.
Before start operating the machine, always read this manual and appended manual carefully, and understand
the proper operational procedure and noted safety caution items.
Especially, always follow the safety caution items described in this manual. Also, if you are unsure of some
operational procedure, do not make a judgment by yourself, but refer to this manual again to check the
appropriate operational procedure. For questions and injuries, please contact below.
The safety caution items described in this manual are categorized as follows depending on the level of bodily
injuries, failure to the machine, and damages. Please always conduct safe operation.
■
Warning
w
WARNING
WHEN MISHANDLED, IT SHOWS THE CONTENTS THAT MAY CAUSE DEATH OR SERIOUS INJURIES.
THIS IS THE MOST IMPORTANT CAUTION ITEMS TO PROTECT THE OPERATORS, INSPECTORS, AND THOSE WHO DO REPAIR OF
THIS MACHINE.
■
Caution
c
CAUTION
When mishandled, it shows the contents that may cause injuries or physical damages.
This is the important caution items to prevent damage on the machine and data.
Please store in a safe place after reading this manual.
When ordering parts, always inform the serial number (Yxxxxx) printed in the nameplate of the machine.
1-2
1
Overview and maintenance of machine
2. About this manual
The manuals of this machine are categorized as follows.
• "YSi-SP Operators Manual"
• "YSi-SP Programming Manual Data Station"
• "YSi-SP Option Manual Real Data"
This manual is the "Operators Manual". In this manual, the operation method of "Solder Paste Inspection
Machine YSi-SP" is described.
For those who operate the "Solder Paste Inspection Machine YSi-SP" for the first time, read this manual carefully
for your safety, and make sure to fully understand correct operational procedure and safety caution items
before start operating.
■
Structure of this manual
"Solder Paste Inspection Machine YSi-SP"
is structured based on its purpose.
Refer to the table below, and read the part based on your purpose to understand handling, operation, and function of the
checking machine.
Purpose Refer to
• To use the inspection machine for the first time
• To check the installation method, operating procedure,
and maintenance of the inspection machine unit.
Operators manual, See
"Chapter 1 Overview and
maintenance of machine"
• To check the procedure of the inspection method by
using the inspection machine
• To check the features of the inspection machine
Operators manual, See
"Chapter 2 Operation"
• To check how to create and edit various data such as
inspection programs and specifications
• To obtain transition data from the inspection machine
and check the production status.
Refer to "Programming
manual Data Station"
• Collect data of inspection results.
• Calculate statistics and verify the tendency of print
condition.
Refer to "Option manual Real
Data"
1-3
1
Overview and maintenance of machine
3. Before Use
3.1 Power supply specifications
Power supply specifications Single-phase AC 200V to 230V±10%
Frequency 50/60Hz±1Hz
Power cable specifications 3-wire type (with earth), Conductor cross section area 20mm
2
or more (with 10A breaker)
3.2 Caution items when installing
■
Power supply connection construction
w
WARNING
ONLY PERSONS QUALIFIED IN ELECTRICAL WORK CAN MAKE POWER SOURCE CONNECTIONS. DO NOT TOUCH THE
MOVING AREA DURING PRODUCTION OPERATION.
FAILURE TO OBSERVE THIS WARNING MAY CAUSE LIFE-THREATENING SERIOUS ACCIDENTS SUCH AS ELECTRIC SHOCK
ACCIDENTS OR FIRE.
PROVIDE THE THIRD TYPE GROUNDING TO PREVENT ELECTRIC SHOCK AND MALFUNCTION.
■
Installation location
c
CAUTION
Do no use this machine in any place where there is dust, oil, smoke, electrical conductivity dust, corrosive gas, or
combustible gas, or where it is high temperature, condensation occurs, or it is exposed to the weather.
This may cause failure, malfunction, or deterioration.
■
Transfer with a forklift
w
WARNING
ONLY QUALIFIED PERSON CAN OPERATE THE FORKLIFT.
DO NOT PUT YOUR BODY UNDER LIFTED MACHINES FOR ANY REASON. CENTER OF GRAVITY IS REFERRED TO "4. 1 MACHINE
SPECIFICATION".
n
NOTE
When there are co-workers, determine a work leader and work according to the instruction.
In this case, observe the following:
• Ensure to give sings and be sure to check the sign each other.
• Give a sign step-by-step.
Use inspected transport equipment (forklifts), which sufficiently supports weight.