80S-2080F480F4-680F5 User’s Manual.pdf - 第112页
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 2 Introduction and Basic Concepts Edition 03/98 from Software V ersion SR.404.xx 2.4 Brief D escription and Principles of the User Interface 2 - 35 2.4.4 Th e Options Menu This con…
2 Introduction and Basic Concepts SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
2.4 Brief Description and Principles of the User Interface Edition 03/98 from Software Version SR.404.xx
2 - 34
2.4.3.4 Vision Functions
The vision functions are used to execute the Teach / Test fiducials, Measure component and Change pack-
age form data functions.
PLEASE NOTE
The complete range of vision functions is described in Chapter 4 of this User’s Manual.
l Teach fiducials (line engineer functions)
The "Teach fiducials“ menu is used to edit fiducials for the PCB position detection system.
l Test component (line engineer functions)
The "Test component“ menu is used to edit package forms for component centering.
2.4.3.5 Start SITEST
This option is used to start the SITEST package for setting up and calibrating the automatic placement
machine.
The user interface and the range of SITEST functions is described in the separate SITEST User Manual.
2.4.3.6 GEM Interface (Option)
In the GEM menu, you can modify and execute the functions of the GEM interface.
PLEASE NOTE
The complete range of functions in the GEM menu is described in Section 11.9 of this User’s Manual.
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 2 Introduction and Basic Concepts
Edition 03/98 from Software Version SR.404.xx 2.4 Brief Description and Principles of the User Interface
2 - 35
2.4.4 The Options Menu
This contains a range of additional and operator functions.
Fig. 2.4.4 The "Options" menu
2 Introduction and Basic Concepts SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
2.4 Brief Description and Principles of the User Interface Edition 03/98 from Software Version SR.404.xx
2 - 36
2.4.4.1 Machine Options
Fig. 2.4.5 Machine options
At the "Operator“ operator control level you can select the "Machine options“ menu to identify which machine
options are available and have been activated.
At the "Line engineer“ operator control level you can activate or deactivate the displayed machine options.
Only the machine options that have been configured for the station concerned will be displayed.
PLEASE NOTE
The available machine options and the range of functions are described in Chapter 5 Vision Functions and
Chapter 11 Station Extensions/Options of this User’s Manual.